FiTech Systems

[Windycity1]

I started installing my new fuel set up today, only had a few hours to work on it though. I have: GoEFI-8, Aeromotive Tank set up with pump/hanger, new -6 lines/an fittings, Aeromotive Fuel filter, and misc new stuff..

I will keep an eye on the Aeromotive fuel tank set up, due to some people mentioning they have had heating issues. I have ran 3 of these pump on 1 hanger in one of my Supras making 1300whp also 1 of these pumps feeding a surge tank for my 1400whp GTR. Both of those I have not had a problem with the Aeromotive pumps having heat issues. But I will still keep an eye on it.



So far I have pulled out the old stuff...tank, lines, pump,filters, Carb (100 miles on a new Quick Fuel carb)...Installed the GoEFI8 onto the intake mani just to see what it looks like so far..Needed to order a few things for the install, wiring harness for fuel pump and new gas tank straps.

Will update back when I have more time to work on the 56, which should be Thursday. Cant wait till I get it all wrapped up.

I'm going to be running my Fitech with an Aeromotive tank. Curious if I need a regulator since the unit has a built in one. For the pump Fitech instructions state that you run the power wire from the pump to the units harness.