Results 1 to 4 of 4
Thread: IAT Sensor install location
Hybrid View
-
04-21-2015 #1
Registered User
- Join Date
- Jan 2013
- Location
- Abbotsford, B.C.
- Posts
- 297
IAT Sensor install location
Hey,
I have a Fast Ez efi multiport kit that I am current installing. On my throttle body I have the port on the rear for the IACV motor and 2 vacuum lines. On the front is the port for the IAT but the sensor from Fast is too big to fit. Can I plug the port on the throttle body and mount this sensor on the underside of the air cleaner? Drill a hole and tap it?
My understanding the purpose of the IAT is to measure the temperature of the air coming into the throttle body.
TIA
-
04-21-2015 #2
-Moderator/Sponsor-
- Join Date
- Apr 2001
- Location
- The City of Fountains
- Posts
- 16,129
I see no problems with doing that.
Originally Posted by Spork82
Andrew1970 GTO Version 3.0
1967 Cougar build
GM High-Tech Performance feature
My YouTube Channel Please Subscribe!
Instagram @dr__efi
I deliver what EFI promises.
Remote Holley EFI tuning.
Please get in touch if I can be of service.
"You were the gun, your voice was the trigger, your bravery was the barrel, your eyes were the bullets." ~ Her
04-21-2015 #3
Registered User
- Join Date
- Jan 2013
- Location
- Abbotsford, B.C.
- Posts
- 297
Thanks Andrew!
Now just need to find the right sized plug for the throttle body.
04-21-2015 #4
Registered User
- Join Date
- Aug 2011
- Location
- North Platte,NE
- Posts
- 876
In a aftermarket setup I would run it as close as possible to TB inlet.
Reply With Quote
