Ridetech TQ rear shock orientation

[dontlifttoshift]

Just put the delrin washers on the bottom of the spring regardless of which way the shock is mounted. It will do the same thing. How much play is there between the spring and adjuster at full droop? If it is more than 1" you may want to look at a tender spring. It's a flatwound jobber that has a rate of about 25lbs and keeps everything in check at full droop but completely collapses under load.

They included the drop mount for a reason, but looking at the pictures I don't know what that reason is. Your theory on adjusting the spanner nut to compensate for the difference is correct.



I always put a light coat of antiseize on the threads.

I had the same problem with the stickers also.