Ridetech TQ rear shock orientation

[SSLance]

Here are some pictures of my "Made by Lance" Lower shock mount brackets for my Quick Performance 9" rear axle housing.

These were taken with the shocks at full compression, no springs installed yet.







Probably about at ride height







With springs on sitting at ride height.







Fully extended with springs





The shock travel with the mounts in this manner basically mimic the shock travel I had with my stock style shocks. Full compression is about 13" center to center, ride height is about 15.5" and fully extended is 20". The bump stop on the shock contacts the shock body just before the bump stop on my axle contacts the frame.

Still trying to find a good spot to put the reservoirs, welcome any suggestions in this matter.