Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Page 7 of 9 FirstFirst ... 2 3 4 5 6 7 8 9 LastLast
    Results 121 to 140 of 170
    1. #121
      Join Date
      Dec 2008
      Location
      Lehigh Valley Pa
      Posts
      1,269
      Here are some engine pics. The Holley Street Dominator is out and the Edelbrack Perfromer RPM is in. And Here is the air hat I am going to use. Believe it's a Spectre.




      1996 Federal Cadillac hearse
      1988 Eureka Chevy hearse

    2. #122
      Join Date
      Feb 2011
      Location
      Where the hosers are.
      Posts
      201
      What happened to going EFI?
      1973 Datsun 240 Z
      2.8L Turbocharged and Injected, WIP.

      DIY Fuel injection forums and information

    3. #123
      Join Date
      Dec 2008
      Location
      Lehigh Valley Pa
      Posts
      1,269
      Quote Originally Posted by Six_Shooter View Post
      What happened to going EFI?
      Still in the plans. Just no idea when. I have the computer, harness, injectors, TB, and intake that needs to be converted. So I still need a tank, run fuel lines, and some sensors.
      1996 Federal Cadillac hearse
      1988 Eureka Chevy hearse

    4. #124
      Join Date
      Dec 2008
      Location
      Lehigh Valley Pa
      Posts
      1,269
      OK got some new parts today. It was a sugggested mod by Yelcamino so thanx to him for the idea and info. Should be a much better system than just a PCV and breather. I had a could instnces of oil in the breather so this should fix that. It's a Moroso catch can/breather, AN fittings, hose, and an AN bulkhead fitting to mount to the valve cover. It all looks very cool and hopefully it helps.
      1996 Federal Cadillac hearse
      1988 Eureka Chevy hearse

    5. #125
      Join Date
      Aug 2006
      Location
      Easton, PA
      Posts
      989
      Country Flag: United States
      Neil, I passed you going the other way on 13th street by the silk mill a few weeks ago, maybe I'll get to see your wagon up close sometime!
      Keith
      Keith C.

    6. #126
      Join Date
      Mar 2010
      Location
      Orlando, FL
      Posts
      266
      Country Flag: United States
      Quote Originally Posted by The Stickman View Post
      It's a Moroso catch can/breather, AN fittings, hose, and an AN bulkhead fitting to mount to the valve cover. It all looks very cool and hopefully it helps.
      i been thinking about doing something similiar. im tired of my breather spitting up on the valve covers. getting tired of wiping them down when i hit the streets. I'll wait and see how yours turns out.

      hey keith, looks like we got another local

      Live for today, tomorrow is never promised.

      Project Eternity: https://www.pro-touring.com/showthre...rs-convertible


    7. #127
      Join Date
      Dec 2008
      Location
      Lehigh Valley Pa
      Posts
      1,269
      Quote Originally Posted by LV42DAY View Post
      i been thinking about doing something similiar. im tired of my breather spitting up on the valve covers. getting tired of wiping them down when i hit the streets. I'll wait and see how yours turns out.

      hey keith, looks like we got another local
      Yea it's a nice set-up but the price of AN 12 fittings will give you a heart attack. I sunk a ton of cash today on parts and a helmet. Should be around all weekend working on the car provided my head is ok if any of the ever growing Lehigh Valley crew wants to show up.
      1996 Federal Cadillac hearse
      1988 Eureka Chevy hearse

    8. #128
      Join Date
      Dec 2008
      Location
      Lehigh Valley Pa
      Posts
      1,269
      Ok got a few thigs done today. Got my second diffuser tunnel done but made the dumb mistake of not trimming it down like the first one. So tomorrow I have to cut it apart. I also got the Moroso catch can mounted. Might add some small braces under the mount as it flexs some. Also got the bulkhead fitting mounted to the valve cover. This should look pretty nice.

      I also worked on my passenger side altenator mount. It is very sturdy. I can get it lined up with the center groove of the 3 groove pulleys. I need to get the power steering pump with the 2 groove pullies out tomorrow. But things are looking good.




      1996 Federal Cadillac hearse
      1988 Eureka Chevy hearse

    9. #129
      Join Date
      Dec 2008
      Location
      Lehigh Valley Pa
      Posts
      1,269
      Ok time for an update. My relocated altenator is almost done. I had to switch crank and water pump pullies as well as switching to a power steering box with 2 droove pulley. Only thing taht is really a problem is my oil fill tube. the aluminum rod I am using as a brace is in the way.





      I am also getting alot done on the diffuser. Both tunnels are pretty much done. they will simply need a final trimming and clean up. But for now they can stay like they are until I can mount them so I can make a center section to join them. At that point it will be one large piece that can come in and out as needed. I am really liking this look.






      1996 Federal Cadillac hearse
      1988 Eureka Chevy hearse

    10. #130
      Join Date
      Nov 2005
      Location
      Little Rock, Arkansas
      Posts
      945
      Wow! Check out the tail feathers on that one!

    11. #131
      Join Date
      Nov 2006
      Location
      Ma.
      Posts
      5,560
      Country Flag: United States
      Nice progress, Its looking good.
      Wayne
      Car FINALLY home !!!!!! lol
      Project FNQUIK https://www.pro-touring.com/showthre...ghlight=FNQUIK

    12. #132
      Join Date
      Jan 2011
      Posts
      17
      That's pretty cool. Doing an undertray, splitter, and all too?

    13. #133
      Join Date
      Dec 2008
      Location
      Lehigh Valley Pa
      Posts
      1,269
      Quote Originally Posted by wallaka View Post
      That's pretty cool. Doing an undertray, splitter, and all too?
      Yea I am planning on an airdam and splitter and the splitter would go back all the way to the radiator support. After reading this article.
      http://www.autospeed.com.au/cms/A_2455/article.html
      http://www.autospeed.com.au/cms/A_2456/article.html
      I am convinced atleast front belly pan is a must have. I have more parts from yesterday that need to be installed today. A set of wire braided brake hoses, HD U-joints, Spal temp switch, and a power steering hose. Also hope to get much more done.
      1996 Federal Cadillac hearse
      1988 Eureka Chevy hearse

    14. #134
      Join Date
      Dec 2008
      Location
      Lehigh Valley Pa
      Posts
      1,269
      Small update. I got the braided performance hoses from Inline Tube on. The rear one was a pain to get in. Plus I had to put a new hard line in as the one that went to the rear hose twisted and crimped on me. Also worked on my diffuser some. I have the center [panel done. Hope to have the 2 tunnels and center sections joined by the end of the weekend. By tomorrow if all goes well. So should be all mounted. Also took some paint off the aluminum hood. Hope to have it painted by the end of the weekend. The 2 groove power steering pump is mounted and has a new hose on the high pressure side. I recieved my race pads from Porterfield. I have R4's for the front and R4D shoes for the rear. They were very helpful and quick as was inline tube. The Spal temp switch is mounted but not wired yet. Also working on a new dash panel. Might be able to unveil it by the end of the weekend. Still need to make a hose for the catch can now that I think about it too.
      1996 Federal Cadillac hearse
      1988 Eureka Chevy hearse

    15. #135
      Join Date
      Nov 2005
      Location
      Little Rock, Arkansas
      Posts
      945
      Looks like RTTS has someone motivated! Go Stickman!

    16. #136
      Join Date
      Dec 2008
      Location
      Lehigh Valley Pa
      Posts
      1,269
      Quote Originally Posted by critter View Post
      Looks like RTTS has someone motivated! Go Stickman!
      Heck yea it does. I needed this so bad. Lately nothing has gone easy but for the most part I haven't cared that it isn't easy. Just like being outside in the nice weather with my car. I do wish I was a bit neater though. Garage is a mess.
      1996 Federal Cadillac hearse
      1988 Eureka Chevy hearse

    17. #137
      Join Date
      Dec 2008
      Location
      Lehigh Valley Pa
      Posts
      1,269
      Ok here is what got done today. Worked on the diffuser. Had to weld up the license plate holder. It doesn't come straight across so we fixed that.



      Oh and my welder cleaning up her welds lol.

      Finally real progress. One tunnel mounted with Dzus fasteners for easy removal.

      And both tunnels and center section mounted.



      Now all three sections need to be glassed together. And there is still alot of trimming and prettying up to be done. But I think it looks great. Not sure if I can get away with leaving the tunnels that deep. Also not sure about leaving them that far off the bumper. I kinda like it that way as it has a European Touring car look. Will have to see.
      1996 Federal Cadillac hearse
      1988 Eureka Chevy hearse

    18. #138
      Join Date
      Dec 2008
      Location
      Lehigh Valley Pa
      Posts
      1,269
      Ok another long day. Spent the day fiddling with the diffuser. I also made a hose for the catch can. Looked at how I am gonna mount my camera. And then at the end of the day I went to do a leak check on all the brake hoses I installed plus the spot where I had to replace a brake line. Well they all looked ok. There was some moisture but could have been from when I first did the swap. So I dried those spots off and had the wife pump the brakes and all looked well. So I decided time to bleed the brakes. I went around to the right rear and before I could do anything I notice the brake line going to that side has a wet spot right in the middle of it. Dry at the wheel and dry on top of the pumkin. So I rub the line to see how wet it is. AS I do that all of a sudden drops start dripping out. It was rusty inside if that spring thing that is wrapped around the line. I must have disturbed it enough to get it to leak. So in that sense it's good it happened. But sucks that now I need to replace that line and might as well do the opposite side. So more work.
      1996 Federal Cadillac hearse
      1988 Eureka Chevy hearse

    19. #139
      Join Date
      Dec 2008
      Location
      Lehigh Valley Pa
      Posts
      1,269
      Gee another day another brake problem. I had to tackle bending lines for the rear axle where it was leaking and well the stock line must have been 35 inches and the ones the parts store have are either 30 or 40 inches. So mine are now a little longer than before and not near as pretty. but they are new and work. But that was the easy part. I went to bleed the brakes after and couldn't get the front bleeders open. I snapped one and gave up on the other and headed out to the parts store AGAIN!!! SO the car now has 2 new calipers to go with everything else new. I will clean out the other bleeders from the old calipers so I can have them as back ups.
      1996 Federal Cadillac hearse
      1988 Eureka Chevy hearse

    20. #140
      Join Date
      Dec 2008
      Location
      Lehigh Valley Pa
      Posts
      1,269
      OK I got some stuff done already today. The new passenger side altenator mount is done. Other than the aluminum tube that needs to be redone It came out nice. The belts are all lined up and the mount is sturdy. For those of you that don't know what I am taking about Olds motors can be tempurmental about having the accessories all on one side. I took off the A/C and relocated the altenator over to the passenger side one to make sure I had no problems and two so it has a more balcanced look and feel. I used the stock drivers side aluminum mount and simply flipped it drilled a hole and sanded the back down some as well as adding the aluminum tube as an upper brace.







      Here are some pics of the diffuser after some trimming. It's starting to come together. It is by no means finished but it's getting there. I have 6 inches of clearance with it. I thought I might have to trim the bottom side but it looks like I can keep it that low.









      Things yet to do include a new dash panel for my guages and switches. I am also trying to figure out how to seal up the top of teh radiator support so all the air goes through the radiator. Still trying to decide how I want to do it. I will probably incorporate the top radiator mount with it. I also will be making new bumper mounts and if time an airdam.
      1996 Federal Cadillac hearse
      1988 Eureka Chevy hearse

    Page 7 of 9 FirstFirst ... 2 3 4 5 6 7 8 9 LastLast



    Advertise on Pro-Touring.com