Results 1 to 20 of 23
-
10-12-2010 #1
Registered User
- Join Date
- Apr 2009
- Posts
- 337
Lexus GS300 LS engine Mount kit!!!
The Second Gen GS300's ran from 97-05 and can be had on the cheap. Strong aftermarket support for the chassis. The "DGR Fabrication" LS engine mounts are steep at $1,500, but look like a really good alternative to getting a High Performance luxury 4-door like the CTS-V...which a lot of us are still priced out of.
http://www.modified.com/features/mod...300/index.html
Last edited by Ash; 10-13-2010 at 05:26 PM. Reason: Fixed link to page 1 of article.
You can't be slick to a can of oil
-
10-12-2010 #2
Registered User
- Join Date
- Mar 2010
- Location
- AZ
- Posts
- 801
That's really slick!
Robert R.
1988 S10 blazer 5.0L SBC 700R4 body off build.
1991 S10 Blazer 4.3L too low daily.
1975 Cutlass Salon currenlty 350/th350
Stupidity should be painful.
-
10-12-2010 #3
Registered User
- Join Date
- Apr 2010
- Location
- Pittsburgh, PA
- Posts
- 717
pretty cool
72 buick skylark
twin-turbo fuel injected buick 350..perhaps stroked to 370 in the works!
-
10-12-2010 #4
Registered User
- Join Date
- May 2001
- Location
- Mesa, Az.
- Posts
- 1,435
WOW. Those are some expensive motor mounts!
Phillip
64 Studebaker Daytona Twin Turbo- http://bit.ly/1SgxQ0g
65 Cutlass F-85 - http://bit.ly/1W4lJm4
-
10-12-2010 #5
-Moderator/Sponsor-
- Join Date
- Apr 2001
- Location
- The City of Fountains
- Posts
- 16,129
Great kit. The fact that the motor mount adapters are billet aluminum certainly adds to the cost. I bet if they had designed these to be fabricated and welded out of steel the price would be way less. Does anyone know if that Lexus is painted or wrapped?
Andrew1970 GTO Version 3.0
1967 Cougar build
GM High-Tech Performance feature
My YouTube Channel Please Subscribe!
Instagram @dr__efi
I deliver what EFI promises.
Remote Holley EFI tuning.
Please get in touch if I can be of service.
"You were the gun, your voice was the trigger, your bravery was the barrel, your eyes were the bullets." ~ Her
-
10-12-2010 #6
Registered User
- Join Date
- Oct 2007
- Location
- Wa
- Posts
- 567
$1500 for motor mounts and a tranny mount, I wonder how much they make on each kit.
Bob
10-12-2010 #7
Registered User
- Join Date
- Jun 2008
- Location
- San Antonio
- Posts
- 86
I love those cars. Always wanted to sell my Impala SS for GS400. Actually love the way they sound w/aftermarket exhaust.
1971 El Camino PT, SC&C, TBJ, UMI bars, UMI LCAs, Hotchkis, C5 brakes, VWW V48s
"Project Inferno"
10-12-2010 #8
Registered User
- Join Date
- Aug 2004
- Location
- Dunwoody, GA
- Posts
- 4,983
Dang it! This was to be my secret luxury build, lol. Though I was plannign to keep the 3.0 6 cylinder. I could not find one with a manual when looking a while back. Did they make one?
Trey
"The early bird may get the worm, but the second mouse gets the cheese."
~ Jon Hammond
1979 WS6 Trans Am stock LT1/T56 drive train out of my Formula. BMW M-parallel rims. C5/C6 brakes
build thread https://www.pro-touring.com/showthre...ghlight=begins
10-12-2010 #9
Registered User
- Join Date
- Dec 2005
- Location
- Birmingham, AL
- Posts
- 3,355
I have always liked that body style. An LS between the fenders would be a great ride.
Stephen
10-13-2010 #10
Registered User
- Join Date
- May 2001
- Location
- Mesa, Az.
- Posts
- 1,435
I was wondering the same thing? If there was a manual (which I didn't remember there being) it is going to be just as hard as finding the Lexus SC300 with a manual.
Originally Posted by WS6
Phillip
64 Studebaker Daytona Twin Turbo- http://bit.ly/1SgxQ0g
65 Cutlass F-85 - http://bit.ly/1W4lJm4
10-13-2010 #11
Registered User
- Join Date
- May 2001
- Location
- Mesa, Az.
- Posts
- 1,435
I thought is said it was painted in the article? I will have to look again. Originally Posted by andrewb70
Phillip
64 Studebaker Daytona Twin Turbo- http://bit.ly/1SgxQ0g
65 Cutlass F-85 - http://bit.ly/1W4lJm4
10-13-2010 #12
Registered User
- Join Date
- Apr 2009
- Posts
- 337
It's painted Andrew.
To WS6 & Phillip. The car over here came with the N/A 2JZ-GE, the sister to the 2JZ-GTE found in the twin turbo Supra. Over in Japan, the Lexus GS300 was the Toyota Aristo. Japan got the twin Turbo 2JZ-GTE. Sorry, but the GS300, nor the Aristo came with the Manual. You Could swap in the Toyota V160 or V161 Getrag 6-speed from the Supra, but it aint cheap by a long shot, $4,000-$6,000. But then again, you've got all the SC300 (Toyota Soarer), Supra, and IS300 (Toyota Altezza) owners pining over them for swaps w/ their 2JZ-GTE or their turbo GE motor. Plus a cutom Driveshaft, Tranny Mount, and a third pedal will have to fabbed. Not worth it now that this swap is available IMHO.You can't be slick to a can of oil
10-13-2010 #13
Registered User
- Join Date
- Dec 2004
- Location
- Beaufort , NC
- Posts
- 1,849
WOW all the bad talk about Toyota...then someone slaps a LS in one and everybody wants one........ROFLMAO!!
1968 F100 sb full vic chassis swap
1965 Mustang coupe 347 5 spd cheap touring SOLD
2003 Porsche 996 Outlaw LS2 swap SOLD
1992 Lexus SC400 daily SOLD
1966 Porsche 912 Outlaw SOLD
1968 Ford F-100 sb SOLD
10-13-2010 #14
Registered User
- Join Date
- May 2001
- Location
- Mesa, Az.
- Posts
- 1,435
I wouldn't say everybody wants one... Just interested in how and what was done. Originally Posted by Restomod
Phillip
64 Studebaker Daytona Twin Turbo- http://bit.ly/1SgxQ0g
65 Cutlass F-85 - http://bit.ly/1W4lJm4
10-13-2010 #15
Registered User
- Join Date
- Jan 2009
- Location
- Jacksonville Florida
- Posts
- 667
why go throught the LS swap BS? Drop in JDM 2JZ-GTE with a nice single turbo . Though I like my 98 widebody GS 400 twin turbo with the V8.
Do what's right,not what's easy
69 Firebird
71 Cuda
98 Supra 6speed white APU
98 Lexus GS400tt widebody
Elite Custom Body
Stefan B.
10-13-2010 #16
-Moderator/Sponsor-
- Join Date
- Apr 2001
- Location
- The City of Fountains
- Posts
- 16,129
This statement is worthless without pics! Originally Posted by elitecustombody
Andrew1970 GTO Version 3.0
1967 Cougar build
GM High-Tech Performance feature
My YouTube Channel Please Subscribe!
Instagram @dr__efi
I deliver what EFI promises.
Remote Holley EFI tuning.
Please get in touch if I can be of service.
"You were the gun, your voice was the trigger, your bravery was the barrel, your eyes were the bullets." ~ Her
10-13-2010 #17
Registered User
- Join Date
- Jan 2009
- Location
- Jacksonville Florida
- Posts
- 667
one of these days I'll finish it ,but here is a link to couple pics before I started on widebody with HRE 540R 20x10, 20x13 Originally Posted by andrewb70
This statement is worthless without pics!
Andrew
http://www.stage6motorsports.com/s6_...cts_gs400.html Do what's right,not what's easy
69 Firebird
71 Cuda
98 Supra 6speed white APU
98 Lexus GS400tt widebody
Elite Custom Body
Stefan B.
10-14-2010 #18
Registered User
- Join Date
- Aug 2004
- Posts
- 548
That looks sweet! One of these days someone should compile a list of all the cars an LS has gone into. Bet it would be a looong list...
Manuel Scettri
------------------------------------------------
1973 Firebird - Pontiac 455
1990 2 Door 4Runner - byebye
1990 2 Door 4Runner - byebye
2016 KIA Sportage diesel - The Daily Driver
10-14-2010 #19
-Moderator-
- Join Date
- Jul 2001
- Location
- Detroit, Michigan
- Posts
- 6,854
The article states $1500 for the Mounting Kit. I wonder if there's more to it than just the mounts and what it all entails. $1500 is a lot of money for just a set of mounts.
And I agree...a Super Camry is a nice alternative to the CTS-V if you can't afford one.
1968 Pro-Touring Camaro LS1
Project: Next Year
- Start date; June '01
- Completion; Sometime next year or the year after.....
10-14-2010 #20
Registered User
- Join Date
- Aug 2006
- Location
- Easton, PA
- Posts
- 989
maybe its just me, but that doesn't make any sense. it won't be emissions legal, so unless you live in a state that doesn't smog, why would you do such a swap? plus the nightmare of making the electronics talk to each other, and keeping the ABS/traction etc working.
there is so much aftermarket for the toyota engines, I can't see the sense in this, unless you just really need a us/asian hybrid.Keith C.
Reply With Quote
