Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Page 6 of 9 FirstFirst 1 2 3 4 5 6 7 8 9 LastLast
    Results 101 to 120 of 170
    1. #101
      Join Date
      Dec 2008
      Location
      Lehigh Valley Pa
      Posts
      1,269
      Well time for an update. I had a water pump go and used this as an excuse to do some upgrades. I added some aftermarket fans, an stainless resivior and a better fan controller. Now I hoped to save some weight with these upgrades but with the water pump going it forced my hand. See I was running an Aluminum water pump that came with the engine I bought off Ebay. But when it came time to change it I had a hard time spending a $100 more just to go aluminum. Now the cast iron pump is 5 lbs heavier than the aluminum one. But the fans I was using were stock GM ones without the shrounds with my own custom mounts. Well the new fatermarket fans would have saved me 5lbs but since that got added back on with the cast pump It's a wash so to speak. But it does look cleaner and I think it will cool better.






      1996 Federal Cadillac hearse
      1988 Eureka Chevy hearse

    2. #102
      Join Date
      Apr 2005
      Location
      dayton, oh
      Posts
      952
      lookin' good, Neil. you'll probably want to come up with some sort of shroud, though. it'll make your fans a LOT more effective.

      do you have a target of getting her back on the road?
      dave.t
      86 Olds 442 - Project If It Ain't Broke, Take It Apart and Fix It
      74 Javelin AMX - stocker

    3. #103
      Join Date
      Nov 2006
      Location
      Ma.
      Posts
      5,560
      Country Flag: United States
      It looks good, where did you get the overflow tank.

      Wayne
      Car FINALLY home !!!!!! lol
      Project FNQUIK https://www.pro-touring.com/showthre...ghlight=FNQUIK


    4. #104
      Join Date
      Dec 2008
      Location
      Lehigh Valley Pa
      Posts
      1,269
      Quote Originally Posted by jackfrost View Post
      lookin' good, Neil. you'll probably want to come up with some sort of shroud, though. it'll make your fans a LOT more effective.

      do you have a target of getting her back on the road?
      I was thinking of making one but this seems to work really well. You can sure feel the heat coming off fans.
      1996 Federal Cadillac hearse
      1988 Eureka Chevy hearse

    5. #105
      Join Date
      Dec 2008
      Location
      Lehigh Valley Pa
      Posts
      1,269
      Quote Originally Posted by Motown 454 View Post
      It looks good, where did you get the overflow tank.

      I bought it off of Ebay. It wasn't that much either.
      1996 Federal Cadillac hearse
      1988 Eureka Chevy hearse

    6. #106
      Join Date
      Dec 2008
      Location
      Lehigh Valley Pa
      Posts
      1,269
      Well I think I got my cooling issue fixed. And while I was at it I finally got the new magnesium valvecovers on. I was super worried drilling into these things. I have heard horror stories when working with magnesium. Then to top it off I thing some got in my eye and I am still freaked from getting metal in my eye the last time. That and the tops of the valvecover are kinda thick so getting grommets to fit is a pain. I hope the PCV one stays in. But I finally found my oil leak. There is a puddle under the distributor behind the intake. The rear of the intake must be leaking. Anyway here are the pics.





      1996 Federal Cadillac hearse
      1988 Eureka Chevy hearse

    7. #107
      Join Date
      Aug 2004
      Location
      Belle Plaine, MN
      Posts
      1,221
      Country Flag: United States
      Lookin' good man-

      Keep working the bugs out and she'll be right as rain soon.

      Can't wait to see how the EFi works for ya!
      Scott Parkhurst


      2011 Car Craft Real Street Eliminator Winner

    8. #108
      Join Date
      Dec 2005
      Location
      Birmingham, AL
      Posts
      3,355
      Country Flag: United States
      Nice valve covers!
      Stephen

    9. #109
      Join Date
      Nov 2005
      Location
      Little Rock, Arkansas
      Posts
      945
      I like it, Stick. Chat tonight so you can tell us in detail what it took to drill those suckers.

    10. #110
      Join Date
      Jul 2010
      Location
      OREGON
      Posts
      364
      Country Flag: United States
      Just read your whole thread and i have to say very nice work on a car that is often over looked..

    11. #111
      Join Date
      Dec 2008
      Location
      Lehigh Valley Pa
      Posts
      1,269
      Minor update. Today I have started taking things apart as I want to swap intakes and have to replace the water pump. So while I have the front of the engine apart I am toying with mounting the altenator on the passenger side. It might really come out well. I also looked at the underside of the rear of the car to see about making a diffuser and came up with some really nice ideas. I also weighed the aluminum hood, hinges and springs. The hood weighs 26lbs and the hinges and springs another 4lbs for a total of 30 lbs.
      1996 Federal Cadillac hearse
      1988 Eureka Chevy hearse

    12. #112
      Join Date
      Feb 2010
      Location
      Central NJ
      Posts
      791
      Cool wagon! its nice to see everyone getting their cars ready for RTTS. see ya there! Good Luck!

      -Sean

    13. #113
      Join Date
      May 2007
      Location
      Mooresville, Indiana
      Posts
      1,874
      Country Flag: United States
      Always good to see a long roof! Excellent!
      Tom

    14. #114
      Join Date
      Mar 2010
      Location
      Orlando, FL
      Posts
      266
      Country Flag: United States
      neil, do you still plan on using the air cleaner? i didnt see it today. i always thought that those were custom made. i would have gotten one a long time ago had i known they are an actual production part.
      Live for today, tomorrow is never promised.

      Project Eternity: https://www.pro-touring.com/showthre...rs-convertible

    15. #115
      Join Date
      Dec 2008
      Location
      Lehigh Valley Pa
      Posts
      1,269
      Quote Originally Posted by LV42DAY View Post
      neil, do you still plan on using the air cleaner? i didnt see it today. i always thought that those were custom made. i would have gotten one a long time ago had i known they are an actual production part.
      The big round one in the pic above? It was on the bench somewhere. Goona try and do up a cold air intake. Have a nice airhat I want to use. That round one pictured up a few posts has some scratching on the lid from rubbing the hood. But if I get the cold air intake done you can have it if you want.
      1996 Federal Cadillac hearse
      1988 Eureka Chevy hearse

    16. #116
      Join Date
      Mar 2010
      Location
      Orlando, FL
      Posts
      266
      Country Flag: United States
      i was talking about the olds batwing air cleaner. i love those. ive seen thoem in hot rods and thought they were custom made. i tried searching for one for a while and came up with nothing so i gave up on them. i had no idea that caddy and olds made them.
      Live for today, tomorrow is never promised.

      Project Eternity: https://www.pro-touring.com/showthre...rs-convertible

    17. #117
      Join Date
      Dec 2008
      Location
      Lehigh Valley Pa
      Posts
      1,269
      Quote Originally Posted by LV42DAY View Post
      i was talking about the olds batwing air cleaner. i love those. ive seen thoem in hot rods and thought they were custom made. i tried searching for one for a while and came up with nothing so i gave up on them. i had no idea that caddy and olds made them.
      Nope the Batwing has been gone awhile now. There are repops on ebay which is where I got mine.
      1996 Federal Cadillac hearse
      1988 Eureka Chevy hearse

    18. #118
      Join Date
      Dec 2008
      Location
      Lehigh Valley Pa
      Posts
      1,269
      Ok minor update. Took some more pics today. We will start off with some that posted in the diffuser thread. Here is the untouched bumper.

      And one side done to show the difference between the 2 sides.

      And both sides done.

      Over the weekend with the help of my wife and LV2DAY who stopped over(Thanx for the help btw) we got it mounted. It's not quite as close to the body as I would like but I think it looks good. Yea I know it needs paint. It's all scracted up from taking it on and off and laying on the floor.










      1996 Federal Cadillac hearse
      1988 Eureka Chevy hearse

    19. #119
      Join Date
      Nov 2005
      Location
      Little Rock, Arkansas
      Posts
      945
      Yeah, it's getting there.

    20. #120
      Join Date
      Mar 2010
      Location
      Orlando, FL
      Posts
      266
      Country Flag: United States
      it was fun hanging out, thanks for having me. your wife has some serious welding skills. i'm hoping she could knock out a few thing i'm looking to get done on the camaro or maybe even teach me so i can do my own work.
      Live for today, tomorrow is never promised.

      Project Eternity: https://www.pro-touring.com/showthre...rs-convertible

    Page 6 of 9 FirstFirst 1 2 3 4 5 6 7 8 9 LastLast



    Advertise on Pro-Touring.com