Project SSINISTR

[awdvette]

Here is my project. 87 Monte Carlo SS


Specs

383 LT1
Forged Eagle Rotating Kit
LSX Killer Trickflow Heads
Custom Supercharger brackets for Powerdyne BD11a running 8Psi
Built T-56
9" Ford Rear 3.70:1
Hotchkis TVS Suspension
Bilstein Shocks
Custom brackets for C5 brakes
LS1 Rear Brakes
Hydroboost from Astro


Still working on it. Next is paint and body

[CruizinKev]

NICE!!!!

[dropit69]

sweet project !!! looks to be really clean body too..

[awdvette]

Some interior pics

[awdvette]

Thanks.

Still have a lot to do. I plan on running some 17x10 or 11's out back with some 315's. I have 255 out back now but the car is traction limited So in the next couple of weeks I plan on doing a frame notch.

[Flash68]

Nice project!

[ed1le]

Love it!

[FirstGenZq8]

boobies! i love all of the gbodies on this site!

LSX Killer Trickflow Heads? did you mean LTX Killer Trickflow Heads?

[1971CHEVELLE]

very cool

[Tony_SS]

Nice setup!

[ProTouring442]

Cool project! Explain if you will the electric water pump on an LT motor?

Shiny Side Up!
Bill

[awdvette]

Cool project! Explain if you will the electric water pump on an LT motor?

Shiny Side Up!
Bill

I installed the electric wp to free up some hp. I also installed a dual roller timing chain on the engine getting rid of the factory drive coupler for the factory wp.

[jackfrost]

badass MC. that is one car I would not want to mess with. what did you use for your pedals?

is there an AWD Vette somewhere?

[lt1chevelle]

what kind of wire looms and spark plug wires are u using. also did u have to make that brakets to the superchrager? i was thinking about putting supercharger on my lt1 but didnt kno if i had to make a braket or not

[awdvette]

boobies! i love all of the gbodies on this site!

LSX Killer Trickflow Heads? did you mean LTX Killer Trickflow Heads?

They flow more then LSX heads.

[awdvette]

badass MC. that is one car I would not want to mess with. what did you use for your pedals?

is there an AWD Vette somewhere?

I had a AWD Trailblazer SS a couple of years ago. As for the pedals I had a 95 F-Body clutch pedal the i extended about 2"

[awdvette]

what kind of wire looms and spark plug wires are u using. also did u have to make that brakets to the superchrager? i was thinking about putting supercharger on my lt1 but didnt kno if i had to make a braket or not

I am running a RM wiring loom kit from Summit

http://store.summitracing.com/partde...5&autoview=sku

With a set of custom MSD Wires.

I custom built the bracket out of 2024 1/2 plate aluminum. I am running a underdrive pulley to run all the accessories and a Jegs SFI damper to run the SC. I was also able to use the factory style tensioner also.

[awdvette]

Updates:

The 383 LT1 I had decided to snap the crankshaft (Eagle)... In 3 places... In my driveway. Ended up putting a ATI Procharger D1SC on her running a little too much boost. So I pulled the engine took it to the dump. Took the majority of the parts and sold them. Then let it sit for a year...

Its back together again... Sporting a new setup..


Specs:

1970 4 Bolt 350 LT1 Block
Lunati Sledgehammer Crank
Forged Rods / Pistons
AFR Eliminator Vortec Heads
Howards Retrofit Roller Cam
Edelbrock Pro Flo EFI Intake Manifold
Fast EZ-EFI fuel injection
MSD 6AL2 Programable Ignition
TH400
3200 Stall Converter
C5 Vette Front Brakes
LS1 Rear Brakes
9" Ford 31 Spline Mosers
OPGI 2/3 Drop Springs
Bilstein Shocks
Procar Scat Seats
3" Pypes exhaust system

[CruizinKev]

looking good! you said you got the Procar Scat seats in? leather or vinyl? how do you feel about them? any pics??

[SSTuner]

This is all custom made by him and yes I'm very proud of him.
If only I can get him to drive three miles to my house and help me with my "Mistress"
I will let him update the status.





Enjoy