69 Camaro

[timopajala]

Hi! Whats the color you have in this beautiful car?

[Jamess113]

Hi! Whats the color you have in this beautiful car?

Thanks it's GM Victory Red. Same color you'd that you'd find on an Impala.

[minendrews68]

Jay,
do you have any updates? You know I've been looking .....

Carl

[Jamess113]

Jay,
do you have any updates? You know I've been looking .....

Carl

Hey Carl

No real progress. The car is over at the interior shop now. Should have it back in a couple of months. Had to have a set of custom coil overs made for the front Wayne Due front subframe to get proper suspension travel at the ride I'd like the car to sit at. JRI is making me a set a single adjustable with remote cans so I'm waiting for those. I also upgrade my rear DSE Afco's to single adjustable's for the rear. That's about it.

[Jamess113]

Jay,
do you have any updates? You know I've been looking .....

Carl

Carl here's the last picture I took before it went over to the interior shop.

[Motown 454]

Talk about 2 sweet rides in one picture.

[minendrews68]

Jay, I was hoping we'd get to meet a little while back.... I just knew I was going to win at least part of that big lottery. It certainly would be on my must have list.

[Jamess113]

Talk about 2 sweet rides in one picture.

Thanks Wayne!

[weircc]

Any pics of pcv routing? i wanna do something that looks good and since how your attention to detail is unreal and i don't see yours im assuming you have done something very nice!!

[Jamess113]

Any pics of pcv routing? i wanna do something that looks good and since how your attention to detail is unreal and i don't see yours im assuming you have done something very nice!!

This is another Camaro we built. It shows where we mounted 2 remote catch cans. I did my red car this way to. They just vent to the atmosphere. The one on the fire wall is hard to get at once the fender is installed so we attached a line and routed it down the bottom of the inner fender so it could be drained if needed. We used a #8 (1/2") line from each valve cover to each can. If you don't want to run 2 cans you could always just do one but I'd run a a #10 or and #12 line from the valve cover to the can.

[Jamess113]

Here's a couple more.

Any pics of pcv routing? i wanna do something that looks good and since how your attention to detail is unreal and i don't see yours im assuming you have done something very nice!!

[Motown 454]

Nice! I like the expansion tank on the radiator too.

[Jamess113]

Nice! I like the expansion tank on the radiator too.

Thanks Wayne. We made that expansion tank and with the top trim it just disappears.

[weircc]

so did you just use valve covers only? all the ones i have been looking at have lines coming from TB,Valley cover etc

[maxharvard]

Stunning car.

[Jamess113]

so did you just use valve covers only? all the ones i have been looking at have lines coming from TB,Valley cover etc

Naturally aspirated LS? I'd run the stock hose from the lifer valley to the intake / TB and then run 1 or 2 open element breathers on the valve cover or covers or like I did with remote canisters to catch any oil mist. I went though this with Damon Sampson at Mast Motorsports when installing one of there LS3 Black label engines a while back. If supercharged do not do the use the lifter valley to intake or TB hose.

[Jamess113]

Stunning car.

Thanks!!

[minendrews68]

Dang son, you ain't right! No one should be able to build a car like that................... well, at least no one that lives so far away from where I live.

[chevyshawn]

Great project, love the detail you put into it. What paint did you use on the firewall, also is the rearend stock width?

[Jamess113]

Great project, love the detail you put into it. What paint did you use on the firewall, also is the rearend stock width?

Thanks! The chassis black is base clear. SEM Trim black with PPG 2060 Flex'd & Flat Clear adjusted to a 15% gloss.

No... the rear end is narrowed. I bought the wheel off set I wanted and measured the rear to fit my wheels.