Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Page 2 of 8 FirstFirst 1 2 3 4 5 6 7 ... LastLast
    Results 21 to 40 of 143
    1. #21
      Join Date
      Sep 2014
      Location
      Sun City West, AZ
      Posts
      672
      Country Flag: United States
      Quote Originally Posted by GrabberGT View Post
      Now Im confused. I read it in defense of those with aftermarket dashes. It does not say you have to have OE dash but that you can modify the one you have if you want. But now... I think drawing the line between custom and race is harder to do than you would think. I think the dash rules should have been covered under "finished look", cover "any openings" and "exposed metal/race interior". "Upholstered interior panels" should also include dash pad. There are some very nice carbon and fiberglass dashes available and in use.

      Is this a race dash or custom?

      Attachment 119133
      My take it is a custom dash because you have a dash. However, as the rule is written, only the OE dash can be modified and not removed. In order to install a custom/after-market dash you have to remove the OE dash, the rules does not allow that removal. A removed dash unit is not a modified dash unit, it is a removed dash unit. If you remove the dash and install an after-market or custom dash, than the car was modified and you are allowed to modify the car in accordance with the rule subset. In this case, it is an unfortunate no-no. As for your interior, according to the picture you may also have a problem with a finished interior look.

      All they have to do is add a word to the dash rule. If they just word the rule to say the OE dash may be modified and/or replaced, that would take care of the problem of having no dash at all. This is a hot rod class so lets hot rod our hot rods with whatever custom stuff we want to do to our hot rods. There is a minimum weight rule, so what is the problem here.
      --
      Kenny Mitchell
      [email protected]

    2. #22
      Join Date
      Mar 2012
      Location
      Escondido CA
      Posts
      493
      Country Flag: United States
      I love the fact that you let Kenny in, and now he has a bunch of complaints.


      1973 Corvette Factory Primer Car
      1969 Barracuda Convertible
      1967 Plymouth Valiant


    3. #23
      Join Date
      Aug 2015
      Posts
      6
      Country Flag: United States
      Complaints? I didn't see any complaints from him.

    4. #24
      Join Date
      Mar 2014
      Location
      Mesa, AZ
      Posts
      637
      Country Flag: United States
      Are other SCCA events really that strict about things like a dash? Just wondering because I've taken my ugly, unfinished car to several events and they didn't even flinch at passing it through tech even though technically it is breaking a few rules (no carpet, "finished look"). I just can't imagine that they would outlaw a car because somebody put an aftermarket dash in it. The fun part of hot rodding is to make something that you like, so if somebody wants to build a carbon fiber dash instead of the cheap plastic one it had from the factory they should be allowed to. There is a limit when something becomes a race car that can be hard to define, but if you want a race car then build one and put it in the correct class. I think they're trying to stop the full race car builds from getting in and cleaning up the competition.

      In my opinion, the picture posted earlier is a race car dash not a hot rod dash. It looks like a NASCAR dash, and I'm pretty sure nobody drives a NASCAR on the street haha.
      Nelson
      1969 Chevelle "Cone Smasher" Family Project
      https://www.pro-touring.com/threads/...uot?highlight=

      1984 "Rustang" GT, 5.0, 5 Speed Project
      https://www.pro-touring.com/threads/...T-(Slow-Build)

    5. #25
      Join Date
      Sep 2014
      Location
      Sun City West, AZ
      Posts
      672
      Country Flag: United States
      Tech inspection are just a safety inspection. The tech inspectors don' t care if you have an illegal part or modification, unless he is your competitor or a friend of your competitor and you beat him. In most cases, the enforcement of illegal parts and modifications are enforced by the competitors you beat.
      --
      Kenny Mitchell
      [email protected]

    6. #26
      Join Date
      Mar 2005
      Location
      Loganville, GA
      Posts
      931
      Country Flag: United States
      SCCA tech looks for safety items (I am a tech inspector for our region), not for rules violations, it is up to competitors to "police" each other in that regard. Edit: Kenny beat me to it.

      As for the dash part, I guess time will tell on that plays out. Might get stricter or maybe a bit more lax.
      Last edited by Randy67; 11-03-2015 at 12:31 PM. Reason: add info
      2018 Cruze LT Hatchback
      2003 Suburban 2500 8.1L
      1975 MGB Roadster
      2003 GSX750F Katana

    7. #27
      Join Date
      Sep 2014
      Location
      Sun City West, AZ
      Posts
      672
      Country Flag: United States
      Quote Originally Posted by Tomswheels View Post
      I love the fact that you let Kenny in, and now he has a bunch of complaints.
      "Let Kenny in" - I thought I was let in a long time ago since, I've been a card carrying member for almost 30 years now. I don't think that makes me a recent "let in".
      --
      Kenny Mitchell
      [email protected]

    8. #28
      Join Date
      Sep 2014
      Location
      Sun City West, AZ
      Posts
      672
      Country Flag: United States
      Quote Originally Posted by Randy67 View Post
      SCCA tech looks for safety items (I am a tech inspector for our region), not for rules violations, it is up to competitors to "police" each other in that regard. Edit: Kenny beat me to it.

      As for the dash part, I guess time will tell on that plays out. Might get stricter or maybe a bit more lax.
      Maybe they do things differently in San Diego.
      --
      Kenny Mitchell
      [email protected]

    9. #29
      Join Date
      Mar 2012
      Location
      Escondido CA
      Posts
      493
      Country Flag: United States
      Nope, no complaints except for C7 Vettes should be allowed in, because he may buy one. Oh and the Lexan rules aren't to his liking. Oh and the Dash wording needs work so that Kennys is legal. Why build your car to the rules when it's cheaper to amend the rules to your car? Nope, no complaints at all.

      1973 Corvette Factory Primer Car
      1969 Barracuda Convertible
      1967 Plymouth Valiant

    10. #30
      Join Date
      Mar 2014
      Location
      Burlington, KY
      Posts
      181
      Country Flag: United States
      Quote Originally Posted by WallaceMFG View Post
      Are other SCCA events really that strict about things like a dash? Just wondering because I've taken my ugly, unfinished car to several events and they didn't even flinch at passing it through tech even though technically it is breaking a few rules (no carpet, "finished look"). I just can't imagine that they would outlaw a car because somebody put an aftermarket dash in it. The fun part of hot rodding is to make something that you like, so if somebody wants to build a carbon fiber dash instead of the cheap plastic one it had from the factory they should be allowed to. There is a limit when something becomes a race car that can be hard to define, but if you want a race car then build one and put it in the correct class. I think they're trying to stop the full race car builds from getting in and cleaning up the competition.

      In my opinion, the picture posted earlier is a race car dash not a hot rod dash. It looks like a NASCAR dash, and I'm pretty sure nobody drives a NASCAR on the street haha.
      From my experience with CAM, the rules are basically only there to stop full race cars, like you said. If you have a normal-ish car that happens to break a rule or two, I don't think anyone is going to stop you. The nature of SCCA rule enforcement and the pro-touring/CAM community means that unless you're being an anti-social jerk and also breaking all the rules to win, you'll be fine with a carbon fiber dash or custom bare aluminum door panels.
      1969 El Camino

    11. #31
      Join Date
      Aug 2012
      Location
      Peoria, AZ
      Posts
      1,758
      Country Flag: United States
      ^ this
      Lance
      1985 Monte Carlo SS Street Car

    12. #32
      Join Date
      Dec 2010
      Posts
      169
      Quote Originally Posted by nokones View Post
      Yes, excellent. Now, we can take the next step and figure out how we can "shut down that lil' Cobra". I think we have a plan.

      Any 2016 Challenge dates and locations yet?
      You won't have to we are building a C6 Corvette to the limit of the new rules with ABS, traction control, carbon brakes, 900 hp 8000 rpm NA LS with Motec electronics for engine management.
      It will have custom suspension with rod ends and correct geometry, 315 fronts and 335 or 355 rears. We will also improve aero to the extent of rules. We have learned so much developing the Cobra the last two years the Corvette should be much easier since it is starting out with a much more advanced platform. Everybody wanted Corvettes in, so we decided to join them and build a real Corvette. The company that built my 850 HP FE is already specing parts for the LS: Carrillo rods, RHS block, Bryant crank and 450 cfm heads, big compression, and big cam C-16 fuel.
      We decided to quit beating on a multi million dollar car that we could not really be altered for fear of destroying its originality and get something that can be cut, welded etc and that is easily replaceable if crashed.

    13. #33
      Join Date
      Sep 2014
      Location
      Sun City West, AZ
      Posts
      672
      Country Flag: United States
      Wow, that is surprising news Bruce. Now, the Corvettes no longer have to chase your Cobra's tail lights and smell your exhaust. CAM-S is shaping up to be a very competitive class and it will be a lot of fun next year. I'm glad you guys decided to stay in the same class. Are you aware that AAS is planning for an event on Jan 2&3 at Marina?
      --
      Kenny Mitchell
      [email protected]

    14. #34
      Join Date
      Dec 2010
      Posts
      169
      The car will not be done before June lots of work to do before then like buying a legal street licensed Z06 and then converting it. No did not know they were starting that early
      If you get into the 32's on the practice course at Crows your car is ready! AAS said we could run my GT until the Corvette is done so they can be ahead of the SCCA curveagain
      Last edited by Cobra 498; 11-04-2015 at 09:22 PM. Reason: added input

    15. #35
      Join Date
      Sep 2012
      Location
      San Diego
      Posts
      264
      Country Flag: United States
      the dash in one of my cars is aluminum. it does have a finished look, not a basic race car look
      Name:  dash2.jpg
Views: 492
Size:  197.0 KB
      Name:  dash4.jpg
Views: 468
Size:  197.0 KB

      this dash does have a stereo in it. all the holes are filled now with gauges, switches and a/c.
      yet the rules pretty much make the car illegal because its metal.
      Ill just have to see if the local cam guys protest me when i bring this car out.
      I suspect this rule will be changed for 2017, at least I hope so
      71 maverick.
      71 comet in build process.
      i work at Current Auto Performance www.currentautoperformance.com. i also build the differentials for San Diego Gear and Axle.

    16. #36
      Join Date
      Sep 2014
      Location
      Sun City West, AZ
      Posts
      672
      Country Flag: United States
      Bryant - Unfortunately, the way the rule is worded, your dash would be a violation. In accordance with the past rulings on how the rule would be enforced in a protest situation, you must retain the OE dash unit and only modify the OE dash just enough to facilitate the intended modification, i.e., remove the factory instrument gauge cluster unit and install an after market type unit like a Dakota instrument cluster unit. According to the existing rules, you can only modify the OE dashboard unit only in a way to facilitate the installation of the Dakota into the OE Dashboard unit, nothing more than that.

      I believe the true intent of this rule is to prevent racecars with license plates like a fully modified CP car with very little interior components from running CAM and I understand and agree with that intent. Most racecar dashes are usually just a "piece" of a flat aluminum just big enough for a couple of gauges and a couple of switches. I sure hope that they will change the rule to allow custom made/after-market type dashboards.

      Right now, I'm just in the exploring stages and trying to find a reputable shop that can build a custom dash and center console for me. The existing rule may put my project on hold or I just may no longer run any SCCA events after I have my custom-made dash and console installed in my car. USCA (optima), NMCA, and other organizations allow custom made dashboards and maybe SCCA will in the future.
      --
      Kenny Mitchell
      [email protected]

    17. #37
      Join Date
      Sep 2014
      Location
      Sun City West, AZ
      Posts
      672
      Country Flag: United States
      Ok, it is SEMA week, any word on if the CAM Challenge dates and sites have been announced? optima announced their 2016 dates today.
      --
      Kenny Mitchell
      [email protected]

    18. #38
      Join Date
      Jun 2009
      Location
      Avon, IN
      Posts
      60
      Country Flag: United States
      So would my dash be a violation then? I plan to run a cam class (i'm a noobie so not sure which one yet..lol) It's an aftermarket bezel with aftermarket gauges.


    19. #39
      Join Date
      Sep 2014
      Location
      Sun City West, AZ
      Posts
      672
      Country Flag: United States
      Kool gauges. By the picture it appears that you are still using the OE dash unit and you just affixed a panel with the gauges to the OE dash unit. By definition of the existing rule, that is a modification of the OE dash and you are totally legal.

      I thought about just installing a panel of analog gauges in my C4 Corvette's OE Dash unit but, it just wouldn't look right. It would look like it was partially done with the mixture of analog gauges and the OE dash and the center console. I would like to do something new, different, and have a fresh look with a total custom design for the entire dash and center console.

      Do you hang out with Indy Dave?
      --
      Kenny Mitchell
      [email protected]

    20. #40
      Join Date
      Jun 2009
      Location
      Avon, IN
      Posts
      60
      Country Flag: United States
      I haven't hung out with Dave, although he is only a few miles from me. I am brand new to scca this year.

    Page 2 of 8 FirstFirst 1 2 3 4 5 6 7 ... LastLast



    Advertise on Pro-Touring.com