Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Page 2 of 7 FirstFirst 1 2 3 4 5 6 7 LastLast
    Results 21 to 40 of 143

    Hybrid View

    1. #1
      Join Date
      Apr 2012
      Location
      Woodstock, IL
      Posts
      2,410
      Country Flag: United States

      2016 SCCA CAM rules

      Right ^^^.

      You can have a custom gauge panel but not a completely sheet aluminum dash basically. Needs to look like more of a street car than a race car.

      SchwartzPerformance
      The leader in bolt-in muscle car chassis
      SchwartzPerformance.com | GMachineChassis.com | Facebook | Twitter | Instagram

      Dealer for: Forgeline, RideTech, Tremec, American Powertrain, Silver Sport Transmissions, GM Performance Parts, RECARO, Cerullo Seats, TMI Products, Vintage Air, Baer Brakes, Wilwood, BeCool, AFCO, Tanks Inc, Holley / Hooker, Ultimate Headers, Rick's Tanks, Moser Engineering, Currie, TechAFX, Stainless Works, II Much Fabrication, and many more


    2. #2
      Join Date
      Sep 2014
      Location
      Sun City West, AZ
      Posts
      672
      Country Flag: United States
      My intent was not have a race car dash like you would see in a race car. My intent was to have the dash and center console completely redesigned like you would see in a custom car in a custom car show. This means that the complete OE dash and console would have to be removed. The custom dash would still have the vents, maybe a padded dash top (not sure yet), of course custom gauges, HVAC controls; and the center console would still have the controls for the windows, the mirrors, and a center console compartment. In order to do something really bitchin is to remove the entire OE dash and console units. I don't want to install just a piece of sheet metal with a few gauges and make it look like a ghetto hatchet job.

      In the SCCA world, modify means you have to leave most of the OE part intact and modify only what is necessary to facilitate intended purpose of your modification. That is the direction the protest committee will take when enforcing that rule. I know by experience.

      Anyways, this is supposed to be a hot rodding class where you race your hot rods. In my opinion, a race car dash is not a race car dash. It is a hot rod dash and that design should be left up to the creator in what that dash looks like and what accessories the dash should have. Hot rods had those type of dashes way before race cars did. As long as it has a dash of some type, then it should be legal to hot rod your hot rod in CAM. If these silly types of rules are going to govern the creativity of the hot rodder the CAM rules will be SCCAd up in no time.

      Other organizations don't care what type of dash you have and what difference does it make in regards to performance especially when you have a minimum weight rule.

      If SCCA is trying to promote CAM to the hot rodding enthusiasts that have a custom car including the dash, they won't be able to compete because of this rule.
      --
      Kenny Mitchell
      [email protected]

    3. #3
      Join Date
      Sep 2014
      Location
      Sun City West, AZ
      Posts
      672
      Country Flag: United States
      I do agree with the backseat and panel removal rule, if the item is removed you should finish it with some type of material. For an example, if you remove the factory door panel, a aluminum piece or something covering the door frame should meet the rule requirement. The same thing with the rear seat, the floor should be finished with something such as carpet, or a panel of some sort. It should have a finished look. Hot rodders just don'' t remove stuff and leave it unfinished. They finish the removal with something so it looks kool. As long as it has a finished look than it should be legal and that finish look should be left to the creator.

      This should also includes if the OE headliner is removed. It needs a finished look. I' m ok with if the finished look is a metal look, as long if was smooth out and painted, and have some resemblance of a finished look as opposed to just removing the panel and doing nothing.

      As for the floor covering rule, it is my opinion as long as it is not bare metal and you have some type of covering than it should be legal. I don't recall any car leaving the factory with just a bare metal floor. Either you have carpeting or a rubber mat covering the floor.
      --
      Kenny Mitchell
      [email protected]

    4. #4
      Join Date
      Nov 2005
      Location
      Central California
      Posts
      2,050
      Country Flag: United States
      Quote Originally Posted by nokones View Post
      I do agree with the backseat and panel removal rule, if the item is removed you should finish it with some type of material. For an example, if you remove the factory door panel, a aluminum piece or something covering the door frame should meet the rule requirement. The same thing with the rear seat, the floor should be finished with something such as carpet, or a panel of some sort. It should have a finished look. Hot rodders just don'' t remove stuff and leave it unfinished. They finish the removal with something so it looks kool. As long as it has a finished look than it should be legal and that finish look should be left to the creator.

      This should also includes if the OE headliner is removed. It needs a finished look. I' m ok with if the finished look is a metal look, as long if was smooth out and painted, and have some resemblance of a finished look as opposed to just removing the panel and doing nothing.

      As for the floor covering rule, it is my opinion as long as it is not bare metal and you have some type of covering than it should be legal. I don't recall any car leaving the factory with just a bare metal floor. Either you have carpeting or a rubber mat covering the floor.
      They didn't leave the factory with metal-covered door panels either. The rules are pretty clear on door panels and the dash/IP. Carpeted flooring is fine. Same with panels that cover missing rear seats. It's kinda like porn as it's hard to define (and there are a lot of definitions for CAM here ...) but you know it when you see it. Something that's bordering on a "race car" appearance is pretty definable. If your metal door panel has vinyl covering it, you're probably okay. If it's bare, probably not ...

      There are plenty of ways to remove interior pieces and recover the bare areas while still keeping lightness in the background. Unfortunately, SCCA Solo has so many interpretations of the Rules for their Categories and sub-classes and it's best to get a clarification from them if you have a question.

      Mary P.
      mpozzi . . . '73 Camaro RS, '69 Camaro SCCA/Trans-Am vintage racer, and a 1989 R7U 1LE Players Challenge car.

      "STICK, you B*TCH!!!!!!"

      "It's not a horse. You can't train it!! "


    5. #5
      Join Date
      Sep 2014
      Location
      Sun City West, AZ
      Posts
      672
      Country Flag: United States
      Well, SCCA hasn't announced the 2016 CAM dates and locations but, I was able to find out that the CAM West event is scheduled for April 29-May 1. I don't know where the event is being held yet but, it appears to be in Southern California either El Toro or Fontana is my guess. I believe Cal Club has been working on getting access to the old Los Alamitos Naval Air Station and event could be held there. Los Alamitos is near Long Beach but, still in Orange County, barely.

      Indy Dave - PRI is almost over with, any word on the dates and sites yet?
      --
      Kenny Mitchell
      [email protected]

    6. #6
      Join Date
      Sep 2014
      Location
      Sun City West, AZ
      Posts
      672
      Country Flag: United States
      News flash - Its going to be Fontana California Speedway.
      --
      Kenny Mitchell
      [email protected]

    7. #7
      Join Date
      Sep 2014
      Location
      Sun City West, AZ
      Posts
      672
      Country Flag: United States
      Quote Originally Posted by GrabberGT View Post
      Now Im confused. I read it in defense of those with aftermarket dashes. It does not say you have to have OE dash but that you can modify the one you have if you want. But now... I think drawing the line between custom and race is harder to do than you would think. I think the dash rules should have been covered under "finished look", cover "any openings" and "exposed metal/race interior". "Upholstered interior panels" should also include dash pad. There are some very nice carbon and fiberglass dashes available and in use.

      Is this a race dash or custom?

      Name:  DashFullView1232084544.jpg
Views: 2145
Size:  50.6 KB
      My take it is a custom dash because you have a dash. However, as the rule is written, only the OE dash can be modified and not removed. In order to install a custom/after-market dash you have to remove the OE dash, the rules does not allow that removal. A removed dash unit is not a modified dash unit, it is a removed dash unit. If you remove the dash and install an after-market or custom dash, than the car was modified and you are allowed to modify the car in accordance with the rule subset. In this case, it is an unfortunate no-no. As for your interior, according to the picture you may also have a problem with a finished interior look.

      All they have to do is add a word to the dash rule. If they just word the rule to say the OE dash may be modified and/or replaced, that would take care of the problem of having no dash at all. This is a hot rod class so lets hot rod our hot rods with whatever custom stuff we want to do to our hot rods. There is a minimum weight rule, so what is the problem here.
      --
      Kenny Mitchell
      [email protected]

    8. #8
      Join Date
      Mar 2012
      Location
      Escondido CA
      Posts
      493
      Country Flag: United States
      I love the fact that you let Kenny in, and now he has a bunch of complaints.

      1973 Corvette Factory Primer Car
      1969 Barracuda Convertible
      1967 Plymouth Valiant

    9. #9
      Join Date
      Aug 2015
      Posts
      6
      Country Flag: United States
      Complaints? I didn't see any complaints from him.

    10. #10
      Join Date
      Mar 2014
      Location
      Mesa, AZ
      Posts
      637
      Country Flag: United States
      Are other SCCA events really that strict about things like a dash? Just wondering because I've taken my ugly, unfinished car to several events and they didn't even flinch at passing it through tech even though technically it is breaking a few rules (no carpet, "finished look"). I just can't imagine that they would outlaw a car because somebody put an aftermarket dash in it. The fun part of hot rodding is to make something that you like, so if somebody wants to build a carbon fiber dash instead of the cheap plastic one it had from the factory they should be allowed to. There is a limit when something becomes a race car that can be hard to define, but if you want a race car then build one and put it in the correct class. I think they're trying to stop the full race car builds from getting in and cleaning up the competition.

      In my opinion, the picture posted earlier is a race car dash not a hot rod dash. It looks like a NASCAR dash, and I'm pretty sure nobody drives a NASCAR on the street haha.
      Nelson
      1969 Chevelle "Cone Smasher" Family Project
      https://www.pro-touring.com/threads/...uot?highlight=

      1984 "Rustang" GT, 5.0, 5 Speed Project
      https://www.pro-touring.com/threads/...T-(Slow-Build)

    11. #11
      Join Date
      Mar 2014
      Location
      Burlington, KY
      Posts
      181
      Country Flag: United States
      Quote Originally Posted by WallaceMFG View Post
      Are other SCCA events really that strict about things like a dash? Just wondering because I've taken my ugly, unfinished car to several events and they didn't even flinch at passing it through tech even though technically it is breaking a few rules (no carpet, "finished look"). I just can't imagine that they would outlaw a car because somebody put an aftermarket dash in it. The fun part of hot rodding is to make something that you like, so if somebody wants to build a carbon fiber dash instead of the cheap plastic one it had from the factory they should be allowed to. There is a limit when something becomes a race car that can be hard to define, but if you want a race car then build one and put it in the correct class. I think they're trying to stop the full race car builds from getting in and cleaning up the competition.

      In my opinion, the picture posted earlier is a race car dash not a hot rod dash. It looks like a NASCAR dash, and I'm pretty sure nobody drives a NASCAR on the street haha.
      From my experience with CAM, the rules are basically only there to stop full race cars, like you said. If you have a normal-ish car that happens to break a rule or two, I don't think anyone is going to stop you. The nature of SCCA rule enforcement and the pro-touring/CAM community means that unless you're being an anti-social jerk and also breaking all the rules to win, you'll be fine with a carbon fiber dash or custom bare aluminum door panels.
      1969 El Camino

    12. #12
      Join Date
      Sep 2014
      Location
      Sun City West, AZ
      Posts
      672
      Country Flag: United States
      Tech inspection are just a safety inspection. The tech inspectors don' t care if you have an illegal part or modification, unless he is your competitor or a friend of your competitor and you beat him. In most cases, the enforcement of illegal parts and modifications are enforced by the competitors you beat.
      --
      Kenny Mitchell
      [email protected]

    13. #13
      Join Date
      Mar 2005
      Location
      Loganville, GA
      Posts
      931
      Country Flag: United States
      SCCA tech looks for safety items (I am a tech inspector for our region), not for rules violations, it is up to competitors to "police" each other in that regard. Edit: Kenny beat me to it.

      As for the dash part, I guess time will tell on that plays out. Might get stricter or maybe a bit more lax.
      Last edited by Randy67; 11-03-2015 at 12:31 PM. Reason: add info
      2018 Cruze LT Hatchback
      2003 Suburban 2500 8.1L
      1975 MGB Roadster
      2003 GSX750F Katana

    14. #14
      Join Date
      Sep 2014
      Location
      Sun City West, AZ
      Posts
      672
      Country Flag: United States
      Quote Originally Posted by Tomswheels View Post
      I love the fact that you let Kenny in, and now he has a bunch of complaints.
      "Let Kenny in" - I thought I was let in a long time ago since, I've been a card carrying member for almost 30 years now. I don't think that makes me a recent "let in".
      --
      Kenny Mitchell
      [email protected]

    15. #15
      Join Date
      Sep 2014
      Location
      Sun City West, AZ
      Posts
      672
      Country Flag: United States
      Quote Originally Posted by Randy67 View Post
      SCCA tech looks for safety items (I am a tech inspector for our region), not for rules violations, it is up to competitors to "police" each other in that regard. Edit: Kenny beat me to it.

      As for the dash part, I guess time will tell on that plays out. Might get stricter or maybe a bit more lax.
      Maybe they do things differently in San Diego.
      --
      Kenny Mitchell
      [email protected]

    16. #16
      Join Date
      Mar 2012
      Location
      Escondido CA
      Posts
      493
      Country Flag: United States
      Nope, no complaints except for C7 Vettes should be allowed in, because he may buy one. Oh and the Lexan rules aren't to his liking. Oh and the Dash wording needs work so that Kennys is legal. Why build your car to the rules when it's cheaper to amend the rules to your car? Nope, no complaints at all.

      1973 Corvette Factory Primer Car
      1969 Barracuda Convertible
      1967 Plymouth Valiant

    17. #17
      Join Date
      Aug 2012
      Location
      Peoria, AZ
      Posts
      1,758
      Country Flag: United States
      ^ this
      Lance
      1985 Monte Carlo SS Street Car

    18. #18
      Join Date
      Sep 2014
      Location
      Sun City West, AZ
      Posts
      672
      Country Flag: United States
      Wow, that is surprising news Bruce. Now, the Corvettes no longer have to chase your Cobra's tail lights and smell your exhaust. CAM-S is shaping up to be a very competitive class and it will be a lot of fun next year. I'm glad you guys decided to stay in the same class. Are you aware that AAS is planning for an event on Jan 2&3 at Marina?
      --
      Kenny Mitchell
      [email protected]

    19. #19
      Join Date
      Dec 2010
      Posts
      169
      The car will not be done before June lots of work to do before then like buying a legal street licensed Z06 and then converting it. No did not know they were starting that early
      If you get into the 32's on the practice course at Crows your car is ready! AAS said we could run my GT until the Corvette is done so they can be ahead of the SCCA curveagain
      Last edited by Cobra 498; 11-04-2015 at 09:22 PM. Reason: added input

    20. #20
      Join Date
      Sep 2012
      Location
      San Diego
      Posts
      264
      Country Flag: United States
      the dash in one of my cars is aluminum. it does have a finished look, not a basic race car look
      Name:  dash2.jpg
Views: 492
Size:  197.0 KB
      Name:  dash4.jpg
Views: 468
Size:  197.0 KB

      this dash does have a stereo in it. all the holes are filled now with gauges, switches and a/c.
      yet the rules pretty much make the car illegal because its metal.
      Ill just have to see if the local cam guys protest me when i bring this car out.
      I suspect this rule will be changed for 2017, at least I hope so
      71 maverick.
      71 comet in build process.
      i work at Current Auto Performance www.currentautoperformance.com. i also build the differentials for San Diego Gear and Axle.

    Page 2 of 7 FirstFirst 1 2 3 4 5 6 7 LastLast



    Advertise on Pro-Touring.com