Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Page 6 of 7 FirstFirst 1 2 3 4 5 6 7 LastLast
    Results 101 to 120 of 143

    Hybrid View

    1. #1
      Join Date
      Jun 2009
      Posts
      651
      Country Flag: United States
      I still don't see why we don't just make a class for cars using factory:
      -frames
      -spring type
      -suspension mounting provisions
      -powerplant architecture/generation as produced
      -factory body construction materials (minus hoods)



      All others; unlimited...go nuts.
      Let the low buck chucks compete and get creative, let the composite, tube chassis, AME/DSE/Schwartz, coilover, LS/coyote/3Gen dudes brawl it out. It's so simple it's painful to watch everyone over think this stuff.
      Dan W
      1968 Plymouth Road Runner
      1962 Dodge Dart 440


    2. #2
      Join Date
      Nov 2013
      Location
      Buckner Kentucky
      Posts
      10
      Country Flag: United States
      [QUOTE=rrunner68;1162943]I still don't see why we don't just make a class for cars using factory:
      -frames
      -spring type
      -suspension mounting provisions
      -powerplant architecture/generation as produced
      -factory body construction materials (minus hoods)

      ESP?
      Brian Mason
      Autocross/Speed Stop Segment Manager, USCA
      Solo Chair, Kentucky Region SCCA

    3. #3
      Join Date
      Jun 2009
      Posts
      651
      Country Flag: United States
      [QUOTE=FMK;1162970]
      Quote Originally Posted by rrunner68 View Post
      I still don't see why we don't just make a class for cars using factory:
      -frames
      -spring type
      -suspension mounting provisions
      -powerplant architecture/generation as produced
      -factory body construction materials (minus hoods)

      ESP?
      I did ESP for years in my Road Runner before CAM was invented because it was where the car fell as a NOC. It's tough to be competitive with 45 years of suspension tech in between the 2 cars. With the cars that are currently classed in ESP as the little sticky tired AWD monsters that they are, I think it's missing the mark for our old junky cars. The CAM deal is good, those ESP cars have their class, we are a big enough segment of the hobby the rate our own. In SDR CAM regularly is a huge piece of the field, and had been for some time when we moved from ESP to SU after a push for ESP-V failed regionally; and I stole that idea from CAL CLUB back in 2010ish; as a I ran a few events from them and they had the participation to make it work.
      Simply put, 2 classes, CAM; with the rules above, and CAM-P with the latter unlimited rule set. EASY.
      Dan W
      1968 Plymouth Road Runner
      1962 Dodge Dart 440

    4. #4
      Join Date
      Sep 2014
      Location
      Sun City West, AZ
      Posts
      672
      Country Flag: United States
      CAM is only two years old and I believe CAM will grow leaps and bounds and when it grows the classes will evolve accordingly. I'm sure there will be more classes in time. If SCCA keeps the rules simple and not exclude anyone I think we may see some of the older ASP, BSP, and ESP cars of all makes and their drivers that use to autocross back in the 80's and 90's wanting to bring their hot rods out. There are still a lot of the older Mopar, Ford, and GM autocross cars that are still around with the their respective drivers. Most of the older guys/cars stop running SCCA because of they didn't want to run with non-american cars in their class and because of the performance rules were too limiting. With the introduction of CAM I think this will change their minds, it has changed my mind.

      Last year, a couple of old BP and CP guys were excited about CAM. A couple of the BP guys told me that they were going to put their old BP cars back to streetable and run CAM. I think in Northern California we may see about 15-20 CAM cars, at least at the American Autocross Series events. I'm not sure about if that many cars will attend the SCCA events.

      Cal Club had a CAM type class for many year going all the way back, I believe the late 80's, and that class was very successful and well attended class. I believe they called it Street Modified (SM) and the San Francisco Region had the same type of class called Open Street Prepared (OSP). Essentially, the rules were the same as what CAM is today.

      The American Autocross Series (AAS) has a vintage class for the older BSP Corvettes C1-C3's and that class was very successful. It is called BSP-V but, if my memory serves me right there were a few limiting rules such as the tire and I think there was a camshaft limitation. Hey BSP-V guys/gals feel free and correct me here on what were some of the BSP-V rules.

      It is great to see that the Muscle and Pony cars are not dead and they are still autocrossing. I'm glad that there are the Detroit Speeds, Speedway, Schwartz, and Ridetechs of the world being involved in autcrossing and manufacturing the parts so we can make our cars fast and/or look really fast with the kool parts.
      --
      Kenny Mitchell
      [email protected]

    5. #5
      Join Date
      Dec 2010
      Posts
      169
      Speaking of CAM and SpeedWay.......


      https://m.youtube.com/watch?feature=...&v=JgHo19bbB6w

    6. #6
      Join Date
      Oct 2014
      Location
      South Dakota
      Posts
      44
      Country Flag: United States
      Quote Originally Posted by rrunner68 View Post
      I still don't see why we don't just make a class for cars using factory:
      -frames
      -spring type
      -suspension mounting provisions
      -powerplant architecture/generation as produced
      -factory body construction materials (minus hoods)

      All others; unlimited...go nuts.
      Let the low buck chucks compete and get creative, let the composite, tube chassis, AME/DSE/Schwartz, coilover, LS/coyote/3Gen dudes brawl it out. It's so simple it's painful to watch everyone over think this stuff.
      Those were my ideas exactly, boy I sure would like to run the green Chllenger against stock location coil spring suspended GM products.....

    7. #7
      Join Date
      Mar 2012
      Location
      Escondido CA
      Posts
      493
      Country Flag: United States
      The weird thing is some of the best/closest racing in the whole San Diego SCCA region this year came between two completely different CAM-T cars (A DSE/ridetech equipped LS3 First gen and a Torsion barred leaf sprung pushrods Valiant), and a CAM-S car (Mustang II nicely setup and driven). Most events we were within 3/10ths of each other's best lap. Great fun, and no rhyme or reason as to why they were so close...
      Attached Images Attached Images    

      1973 Corvette Factory Primer Car
      1969 Barracuda Convertible
      1967 Plymouth Valiant

    8. #8
      Join Date
      Apr 2006
      Location
      Huntington Beach, CA
      Posts
      2,420
      Country Flag: United States
      Quote Originally Posted by Tomswheels View Post
      The weird thing is some of the best/closest racing in the whole San Diego SCCA region this year came between two completely different CAM-T cars (A TCI equipped LS3 First gen and a Torsion barred leaf sprung pushrods Valiant), and a CAM-S car (Mustang II nicely setup and driven). Most events we were within 3/10ths of each other's best lap. Great fun, and no rhyme or reason as to why they were so close...
      Edited the suspension part. SDR CAM have a great group of folks. I think the reason the times are so close is that despite very different car setups driver talent is a great equalizer!
      Please Subscribe to the AutoXandTrack YouTube Channel

      Autocross and track blog about running autocross and track events with pro touring cars

    9. #9
      Join Date
      Sep 2014
      Location
      Sun City West, AZ
      Posts
      672
      Country Flag: United States
      Dave, well said. optima (USCA) will also allow it as Brian has competed in several optima events with his Camaro. You may not get many style points in the Lingenfelter Design &Engineering segment but, at least you can compete without the fear of being protested and disqualified.
      --
      Kenny Mitchell
      [email protected]

    10. #10
      Join Date
      Dec 2004
      Location
      Scottsdale, AZ
      Posts
      778
      Country Flag: United States
      Who in Cal-Club SCCA can give some info of car build info/rules? I’m a SCCA member and compete in Spec Racer Ford, mainly out of the Southwest Division. My 69 Camaro will most likely be ready to compete (On West Coast) sometime in 2017 if all goes as planned.

      Name:  IMG_4389.jpg
Views: 436
Size:  236.1 KB
      69 SS/350 Camaro
      AME Front & Rear LT Build
      69 SS/396 Camaro
      LT4 Build
      71 K5

    11. #11
      Join Date
      Sep 2011
      Location
      Speedway In.
      Posts
      191
      Country Flag: United States
      Quote Originally Posted by Cdog View Post
      Who in Cal-Club SCCA can give some info of car build info/rules? I’m a SCCA member and compete in Spec Racer Ford, mainly out of the Southwest Division. My 69 Camaro will most likely be ready to compete (On West Coast) sometime in 2017 if all goes as planned.

      Name:  IMG_4389.jpg
Views: 436
Size:  236.1 KB
      The rules are posted in pdf form in the first post of this thread.
      Dave Dusterberg
      http://www.facebook.com/camchallengeeast
      1979 Aspen R/T (under construction soon to be #19 CAM/T)
      2002 Ram 1500 SLT
      2005 Magnum R/T
      2005 Mustang GT #19 CAM/C

    12. #12
      Join Date
      Dec 2004
      Location
      Scottsdale, AZ
      Posts
      778
      Country Flag: United States
      Quote Originally Posted by IndyDave View Post
      The rules are posted in pdf form in the first post of this thread.

      Interesting. .. I didn’t see anything about roll cages?
      69 SS/350 Camaro
      AME Front & Rear LT Build
      69 SS/396 Camaro
      LT4 Build
      71 K5

    13. #13
      Join Date
      Apr 2006
      Location
      Huntington Beach, CA
      Posts
      2,420
      Country Flag: United States
      Quote Originally Posted by Cdog View Post
      Interesting. .. I didn’t see anything about roll cages?
      you are surprised they aren't required or worried they aren't allowed?
      Please Subscribe to the AutoXandTrack YouTube Channel

      Autocross and track blog about running autocross and track events with pro touring cars

    14. #14
      Join Date
      Sep 2014
      Location
      Sun City West, AZ
      Posts
      672
      Country Flag: United States
      Quote Originally Posted by Chad-1stGen View Post
      you are surprised they aren't required or worried they aren't allowed?
      The rule about Roll Bars is located in Section 3.3.2 and Appendix C. If you have one it would be a good idea to have it inspected by a certified SCCA Tech Inspector and get a log book for proof that the bar does meet the rule. Most of the time a regular tech inspector at an autocross event will not have a clue or know what the difference is between a burnt biscuit or an earhole on what to inspect but, if you're lucky enough to have an inspector with knowledge of the rule and wants to do his/her job effectively and enforce the rule, you may in a pickle if the cage/bar is not constructed/designed/installed in accordance with Appendix C.

      It only happened once with me that my cage was questioned and I just pointed to the stamp number on the hoop that it was inspected and certified.
      --
      Kenny Mitchell
      [email protected]

    15. #15
      Join Date
      Sep 2012
      Location
      San Diego
      Posts
      264
      Country Flag: United States
      The rules change every year. Building a camaro is pretty safe in being able to always fit in the cam traditional class. Its really hard to predict what the 2017 rules will be, but if you build to the 2016 rules, you should be ok for 2017. You might have minor cosmetic changes on interior depending on what you do.
      71 maverick.
      71 comet in build process.
      i work at Current Auto Performance www.currentautoperformance.com. i also build the differentials for San Diego Gear and Axle.

    16. #16
      Join Date
      Jun 2009
      Posts
      651
      Country Flag: United States
      Just get license plates, slap carpet in and put some 200tw tires on your SRF. It'll fit in great with all the other purpose built tube chassis cars in CAM, GoodGuys and OUSCI.
      Dan W
      1968 Plymouth Road Runner
      1962 Dodge Dart 440

    17. #17
      Join Date
      Sep 2014
      Location
      Sun City West, AZ
      Posts
      672
      Country Flag: United States
      Quote Originally Posted by rrunner68 View Post
      Just get license plates, slap carpet in and put some 200tw tires on your SRF. It'll fit in great with all the other purpose built tube chassis cars in CAM, GoodGuys and OUSCI.
      Don't forget your lights, wipers, and horn.
      --
      Kenny Mitchell
      [email protected]

    18. #18
      Join Date
      Dec 2004
      Location
      Scottsdale, AZ
      Posts
      778
      Country Flag: United States
      Quote Originally Posted by nokones View Post
      Don't forget your lights, wipers, and horn.
      LOL! Problem is the 1670 total weight with me in the car. After the Gen3 conversion I’ll loose another 100 lbs.

      The SRF class is the most fun I’ve had in racing since I raced karts as a kid.
      69 SS/350 Camaro
      AME Front & Rear LT Build
      69 SS/396 Camaro
      LT4 Build
      71 K5

    19. #19
      Join Date
      Mar 2013
      Location
      Livermore, Ca
      Posts
      36
      Country Flag: United States
      Ken, is your car going to be finished for this upcoming season?

    20. #20
      Join Date
      Sep 2014
      Location
      Sun City West, AZ
      Posts
      672
      Country Flag: United States
      Quote Originally Posted by chetly View Post
      Ken, is your car going to be finished for this upcoming season?
      I was suppose to pick the car up last Monday but, Lingenfelter had to send the pump back to Aviaid. My guess is the car should be ready next week. The weather is looking good in Michigan for next week so I hope it stays that way.
      --
      Kenny Mitchell
      [email protected]

    Page 6 of 7 FirstFirst 1 2 3 4 5 6 7 LastLast



    Advertise on Pro-Touring.com