Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Page 1 of 8 1 2 3 4 5 6 ... LastLast
    Results 1 to 20 of 143
    1. #1
      Join Date
      Sep 2011
      Location
      Speedway In.
      Posts
      191
      Country Flag: United States

      2016 SCCA CAM rules

      2016 CAM rules in down loadable PDF form.
      Attached Images Attached Images
      Dave Dusterberg
      http://www.facebook.com/camchallengeeast
      1979 Aspen R/T (under construction soon to be #19 CAM/T)
      2002 Ram 1500 SLT
      2005 Magnum R/T
      2005 Mustang GT #19 CAM/C

    2. #2
      Join Date
      Aug 2012
      Location
      Peoria, AZ
      Posts
      1,758
      Country Flag: United States
      Where are all of the Corvette guys? Haven't seen the news yet? :D

      Super glad the G-bodies are moved to CAM-T as well.
      Lance
      1985 Monte Carlo SS Street Car

    3. #3
      Join Date
      Sep 2014
      Location
      Sun City West, AZ
      Posts
      672
      Country Flag: United States
      Dave:
      For some reason I can't view your attachment. Could you please email me a copy of the rules to [email protected]. I would really appreciate it very much. This is a coincedence, I was about to send out a posting seeking if anyone would know when the rules were going to be published since it is now November.
      --
      Kenny Mitchell
      [email protected]

    4. #4
      Join Date
      Aug 2012
      Location
      Peoria, AZ
      Posts
      1,758
      Country Flag: United States
      Just sent them Kenny...

      Me thinks you'll approve.
      Lance
      1985 Monte Carlo SS Street Car

    5. #5
      Join Date
      Aug 2012
      Location
      Peoria, AZ
      Posts
      1,758
      Country Flag: United States
      Lance
      1985 Monte Carlo SS Street Car

    6. #6
      Join Date
      Aug 2012
      Location
      Peoria, AZ
      Posts
      1,758
      Country Flag: United States
      Or if that hot link doesn't work....

      Lance
      1985 Monte Carlo SS Street Car

    7. #7
      Join Date
      Mar 2013
      Posts
      89
      Country Flag: United States
      Is this a finalized CAM Appendix for 2016?
      BTM AutoSport
      #99 '99 Roush Stage II - CP

    8. #8
      Join Date
      Aug 2012
      Location
      Peoria, AZ
      Posts
      1,758
      Country Flag: United States
      Yes...
      Lance
      1985 Monte Carlo SS Street Car

    9. #9
      Join Date
      Sep 2014
      Location
      Sun City West, AZ
      Posts
      672
      Country Flag: United States
      Quote Originally Posted by SSLance View Post
      Just sent them Kenny...

      Me thinks you'll approve.
      Yes, excellent. Now, we can take the next step and figure out how we can "shut down that lil' Cobra". I think we have a plan.

      Any 2016 Challenge dates and locations yet?
      --
      Kenny Mitchell
      [email protected]

    10. #10
      Join Date
      Aug 2012
      Location
      Peoria, AZ
      Posts
      1,758
      Country Flag: United States
      I think I heard that the schedule will be released sometime during SEMA week...heard something thru the grapevine at possibly 4 challenge dates next season.
      Lance
      1985 Monte Carlo SS Street Car

    11. #11
      Join Date
      Sep 2014
      Location
      Sun City West, AZ
      Posts
      672
      Country Flag: United States
      Overall, I like the new rules because now I get to play, have fun, and get to hang with the kool cars and guys/gals now. The class structure is fine and will evolve over time. Although, I do have a couple of comments. In my opinion, I feel the lexan should not be allowed because if the car is supposed to be "fully considered street legal", legally you cannot have non-approved safety glass on a public highway. Lexan is not an approved safety glass. The weight penalty may take care of that subject. It is just the contradiction that a CAM car is suppose to be street legal and that Lexan is not street legal that I was pointing out.

      I do not have a C7, yet, and I don't think I will ever have a Viper, but, I feel the C7 and the new generation Viper should not be excluded. With the open rules on performance enhancements and modifications, I feel anyone can compete with those cars if they want to. If the performance rules are going to be open, then the car models should be open as long as it is an American, front engine, and rear wheel driven car. Hell, in CAM-S, we have to compete against the 2400 or 2500 pound, 850 horsepower Cobra, so what is the difference in getting creamed by one car as opposed to another car. The objective is we are suppose to have fun rather you're getting creamed or not, as long as you are not getting creamed by a 2300 pound 500 horsepower non-american bumblebee car.

      I'm not whining or sniveling, I'm just commenting and I am truly very greatful that I can compete in the CAM Challenges next year.
      --
      Kenny Mitchell
      [email protected]

    12. #12
      Join Date
      Dec 2010
      Location
      Fredericksburg, VA.
      Posts
      3,164
      Country Flag: United States
      Just curious why the interior floor covering can be removed in Cam-S but not in C or T?
      Steve Hayes
      "Dust Off"
      68 Camaro

      Support the RPM Act
      https://www.sema.org/rpm-faq.

    13. #13
      Join Date
      Apr 2012
      Location
      Woodstock, IL
      Posts
      2,410
      Country Flag: United States
      Quote Originally Posted by nokones View Post
      Overall, I like the new rules because now I get to play, have fun, and get to hang with the kool cars and guys/gals now. The class structure is fine and will evolve over time. Although, I do have a couple of comments. In my opinion, I feel the lexan should not be allowed because if the car is supposed to be "fully considered street legal", legally you cannot have non-approved safety glass on a public highway. Lexan is not an approved safety glass. The weight penalty may take care of that subject. It is just the contradiction that a CAM car is suppose to be street legal and that Lexan is not street legal that I was pointing out.

      I do not have a C7, yet, and I don't think I will ever have a Viper, but, I feel the C7 and the new generation Viper should not be excluded. With the open rules on performance enhancements and modifications, I feel anyone can compete with those cars if they want to. If the performance rules are going to be open, then the car models should be open as long as it is an American, front engine, and rear wheel driven car. Hell, in CAM-S, we have to compete against the 2400 or 2500 pound, 850 horsepower Cobra, so what is the difference in getting creamed by one car as opposed to another car. The objective is we are suppose to have fun rather you're getting creamed or not, as long as you are not getting creamed by a 2300 pound 500 horsepower non-american bumblebee car.

      I'm not whining or sniveling, I'm just commenting and I am truly very greatful that I can compete in the CAM Challenges next year.
      I agree on the lexan windshields.. But lexan side glass could be allowed.
      I also agree on the C7 / Viper. I mean the 2008+ Z06 vs a base 2014 Stingray... Come on lol.
      SchwartzPerformance
      The leader in bolt-in muscle car chassis
      SchwartzPerformance.com | GMachineChassis.com | Facebook | Twitter | Instagram

      Dealer for: Forgeline, RideTech, Tremec, American Powertrain, Silver Sport Transmissions, GM Performance Parts, RECARO, Cerullo Seats, TMI Products, Vintage Air, Baer Brakes, Wilwood, BeCool, AFCO, Tanks Inc, Holley / Hooker, Ultimate Headers, Rick's Tanks, Moser Engineering, Currie, TechAFX, Stainless Works, II Much Fabrication, and many more

    14. #14
      Join Date
      Sep 2014
      Location
      Sun City West, AZ
      Posts
      672
      Country Flag: United States
      After digesting the new rules, it appears that you can not have a custom made dashboard and console. I was looking forward to remove my OE dash and console and have a complete custom dash and console installed in my C4 Corvette. The only way you can do something completely custom is take out the factory dash and have something made out of carbon fiber. I guess if I want to play in CAM, I won't be able to do that now. I'm not understanding why there is that rule when the performance rules are essentially open. I thought that this was a hot rodding class and with hot rodding you should be able to do anything hot rod related you want. The last time I checked, having a custom made dash was a hot rodding thing to do.

      I'm a little foggy on the meaning of the front seat rule. Does that rule mean you can't have a bench type seat and you must have bucket seats? I'm just curious on the meaning. It's not like that I want to install a bench seat in my C4 Corvette.
      --
      Kenny Mitchell
      [email protected]

    15. #15
      Join Date
      Feb 2014
      Location
      East Tennessee
      Posts
      75
      Country Flag: United States
      I do not read the rules that way. The rules state that you can modify the OE dash...modify is a big open term that allows you to do almost anything. I believe the spirit of the rule once again is to have a finished dash that is not a race car piece....same with the console. I interpret the seat rule as not moving the driver position to the back seat for weight distribution...I feel they are continuing the non-race car theme.
      I am good with these rules. They are wide open but also are trying to keep these cars as hot rods and not race cars. After competing in the Goodguys and Ultimate Street Car series it is clear to me that some cars are truly race cars with a license plate and like it or not that is being discouraged by the SCCA and Ultimate Street Car.

      --------------------------------------------------------------------------
      Keith Corrigan
      1968 Camaro "Velocity"

      Drive em hard, enjoy them forever!!


    16. #16
      Join Date
      Apr 2012
      Location
      Woodstock, IL
      Posts
      2,410
      Country Flag: United States

      2016 SCCA CAM rules

      Right ^^^.

      You can have a custom gauge panel but not a completely sheet aluminum dash basically. Needs to look like more of a street car than a race car.
      SchwartzPerformance
      The leader in bolt-in muscle car chassis
      SchwartzPerformance.com | GMachineChassis.com | Facebook | Twitter | Instagram

      Dealer for: Forgeline, RideTech, Tremec, American Powertrain, Silver Sport Transmissions, GM Performance Parts, RECARO, Cerullo Seats, TMI Products, Vintage Air, Baer Brakes, Wilwood, BeCool, AFCO, Tanks Inc, Holley / Hooker, Ultimate Headers, Rick's Tanks, Moser Engineering, Currie, TechAFX, Stainless Works, II Much Fabrication, and many more

    17. #17
      Join Date
      Sep 2014
      Location
      Sun City West, AZ
      Posts
      672
      Country Flag: United States
      My intent was not have a race car dash like you would see in a race car. My intent was to have the dash and center console completely redesigned like you would see in a custom car in a custom car show. This means that the complete OE dash and console would have to be removed. The custom dash would still have the vents, maybe a padded dash top (not sure yet), of course custom gauges, HVAC controls; and the center console would still have the controls for the windows, the mirrors, and a center console compartment. In order to do something really bitchin is to remove the entire OE dash and console units. I don't want to install just a piece of sheet metal with a few gauges and make it look like a ghetto hatchet job.

      In the SCCA world, modify means you have to leave most of the OE part intact and modify only what is necessary to facilitate intended purpose of your modification. That is the direction the protest committee will take when enforcing that rule. I know by experience.

      Anyways, this is supposed to be a hot rodding class where you race your hot rods. In my opinion, a race car dash is not a race car dash. It is a hot rod dash and that design should be left up to the creator in what that dash looks like and what accessories the dash should have. Hot rods had those type of dashes way before race cars did. As long as it has a dash of some type, then it should be legal to hot rod your hot rod in CAM. If these silly types of rules are going to govern the creativity of the hot rodder the CAM rules will be SCCAd up in no time.

      Other organizations don't care what type of dash you have and what difference does it make in regards to performance especially when you have a minimum weight rule.

      If SCCA is trying to promote CAM to the hot rodding enthusiasts that have a custom car including the dash, they won't be able to compete because of this rule.
      --
      Kenny Mitchell
      [email protected]

    18. #18
      Join Date
      Sep 2014
      Location
      Sun City West, AZ
      Posts
      672
      Country Flag: United States
      Quote Originally Posted by Kcorrigan2 View Post
      I do not read the rules that way. The rules state that you can modify the OE dash...modify is a big open term that allows you to do almost anything. I believe the spirit of the rule once again is to have a finished dash that is not a race car piece....same with the console. I interpret the seat rule as not moving the driver position to the back seat for weight distribution...I feel they are continuing the non-race car theme.
      I am good with these rules. They are wide open but also are trying to keep these cars as hot rods and not race cars. After competing in the Goodguys and Ultimate Street Car series it is clear to me that some cars are truly race cars with a license plate and like it or not that is being discouraged by the SCCA and Ultimate Street Car.
      At optima, custom builds such as a dash it is not discouraged at all. You can compete with anything you want just like Mike Dusold's Camaro. He takes it in the shorts in the Lingenfelter Design & Engineering segment because his car is essentially a race car build with a license plate. You just don't get many style points in the Lingenfelter Design & Engineering segment. According to Mike Copeland, they want to see creativity and custom builds rather than the OE units. You get more points with a custom build component than you get with a stock design as long it is still streetable, and of course, kool looking.
      --
      Kenny Mitchell
      [email protected]

    19. #19
      Join Date
      Aug 2007
      Location
      Roanoke (FortWorth) Texas
      Posts
      786
      Now Im confused. I read it in defense of those with aftermarket dashes. It does not say you have to have OE dash but that you can modify the one you have if you want. But now... I think drawing the line between custom and race is harder to do than you would think. I think the dash rules should have been covered under "finished look", cover "any openings" and "exposed metal/race interior". "Upholstered interior panels" should also include dash pad. There are some very nice carbon and fiberglass dashes available and in use.

      Is this a race dash or custom?

      Name:  DashFullView1232084544.jpg
Views: 2145
Size:  50.6 KB
      Chris

      Total Cost Involved - Ridetech - Fatman - Total Control Products - Gateway Performance - MaverickMan Carbon

    20. #20
      Join Date
      Sep 2014
      Location
      Sun City West, AZ
      Posts
      672
      Country Flag: United States
      I do agree with the backseat and panel removal rule, if the item is removed you should finish it with some type of material. For an example, if you remove the factory door panel, a aluminum piece or something covering the door frame should meet the rule requirement. The same thing with the rear seat, the floor should be finished with something such as carpet, or a panel of some sort. It should have a finished look. Hot rodders just don'' t remove stuff and leave it unfinished. They finish the removal with something so it looks kool. As long as it has a finished look than it should be legal and that finish look should be left to the creator.

      This should also includes if the OE headliner is removed. It needs a finished look. I' m ok with if the finished look is a metal look, as long if was smooth out and painted, and have some resemblance of a finished look as opposed to just removing the panel and doing nothing.

      As for the floor covering rule, it is my opinion as long as it is not bare metal and you have some type of covering than it should be legal. I don't recall any car leaving the factory with just a bare metal floor. Either you have carpeting or a rubber mat covering the floor.
      --
      Kenny Mitchell
      [email protected]

    Page 1 of 8 1 2 3 4 5 6 ... LastLast



    Advertise on Pro-Touring.com