Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Results 1 to 5 of 5
    1. #1
      Join Date
      Jul 2006
      Location
      Carson City Mi.
      Posts
      54
      Country Flag: United States

      Big block fuel injection question

      I bought a multiport fuel injection unit many years ago for my build. The unit is cutler brand it has a 2000cfm throttle body on it and I believe 42lb injectors and is for a big block chevy. My motor was recently assembled and when we went to install the intake we found out it was made for a tall deck big block. After searching the net I found the company is no longer in buisness holley bought them out. Since my motor is a standard big block not a tall deck my thoughts were to buy a new intake from holley the one they use for the commander 950 and move my throttlebody,injectors and rails over to the new intake. I spoke to edelbrock and affordable fuel injection and they both said that a 2000cfm throttle body and the injectors are to big for what I need. My car is mainly going to be street driven the engine should make around 600 horse and is 10 to 1 compression full roller and running edelbrock rpm rectangle port heads it is a 454 . Holleys web site for the commander 950 has a 2000cfm throttle on it so why would the one I have be to big. Not sure if I should just sell the unit or try to use the parts off of it to try and save some cash. This is my first experience with a after market injection system so I really dont no to much about them. Any thoughts would be appreciated. Has anybody had any experience with edelbrocks multiport kits.
      Attached Images Attached Images  

    2. #2
      Join Date
      Apr 2001
      Location
      The City of Fountains
      Posts
      16,129
      Country Flag: United States
      I would just get the right intake and swap all your parts over. The 42 lb/hr injectors will work just fine, they may be a tad big, but not grossly big. The 2000cfm throttle body is not a problem either. I see it has a progressive linkage so no big deal.

      The main issue is that that throttle body requires a 4500 series intake. You'll need to see if Holley still offers it.

      What electronics do you plan to use?

      Andrew

      Edit...Looks like you a re in luck:

      https://holley.com/products/intakes/...parts/9901-202
      Last edited by andrewb70; 10-08-2014 at 05:54 PM.
      1970 GTO Version 3.0
      1967 Cougar build
      GM High-Tech Performance feature
      My YouTube Channel Please Subscribe!
      Instagram @dr__efi
      I deliver what EFI promises.
      Remote Holley EFI tuning.
      Please get in touch if I can be of service.

      "You were the gun, your voice was the trigger, your bravery was the barrel, your eyes were the bullets." ~ Her

    3. #3
      Join Date
      Jul 2006
      Location
      Carson City Mi.
      Posts
      54
      Country Flag: United States
      Thanks for the reply Andrew. I was looking at that same intake to use and was figuring the electronics were out dated and should be changed. Do you have any recommendations? I see there are quite a few companys making the electronics now dont know what I need for sure. Would the new electronics plug in to my injectors and sensors.



    4. #4
      Join Date
      Apr 2001
      Location
      The City of Fountains
      Posts
      16,129
      Country Flag: United States
      Quote Originally Posted by Rich G View Post
      Thanks for the reply Andrew. I was looking at that same intake to use and was figuring the electronics were out dated and should be changed. Do you have any recommendations? I see there are quite a few companys making the electronics now dont know what I need for sure. Would the new electronics plug in to my injectors and sensors.
      Rich,

      I like the new Holley EFI system very much. I will be using the Dominator system on my Cougar build, but that might be overkill for you if you don't need auto trans control or drive by wire throttle body control.

      Given that you your current hardware is not optimal, you may want to just sell the whole thing to a guy with a boat (which is what it was designed for) and just get new hardware and the Holley HP system.

      So...get this:

      https://holley.com/products/fuel_sys.../parts/550-500

      Plus the right intake for your application. The kit above has some extraneous hardware, so you might be better off getting everything ala carte.


      Andrew
      Last edited by andrewb70; 10-09-2014 at 02:25 PM.
      1970 GTO Version 3.0
      1967 Cougar build
      GM High-Tech Performance feature
      My YouTube Channel Please Subscribe!
      Instagram @dr__efi
      I deliver what EFI promises.
      Remote Holley EFI tuning.
      Please get in touch if I can be of service.

      "You were the gun, your voice was the trigger, your bravery was the barrel, your eyes were the bullets." ~ Her

    5. #5
      Join Date
      Jul 2006
      Location
      Carson City Mi.
      Posts
      54
      Country Flag: United States
      Thanks again for the advice I will just end up trying to sell it and put the money into another unit.




    Advertise on Pro-Touring.com