Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Results 1 to 20 of 172

    Hybrid View

    1. #1
      Join Date
      Sep 2010
      Posts
      660
      Country Flag: United States
      Quote Originally Posted by coolwelder62 View Post
      Good lookin car,Good lookin owner!
      Congrats Bret, a 1st, 5th and 7th with an overall 3rd place is very good. One of my favorite builds out.

      This pictures captures it all "A man and his machine" on a mission.



      By the way, just got done reading Robs story... My hat is off to you. Cheers for all the good things you do.


    2. #2
      Join Date
      Oct 2004
      Location
      Indiana
      Posts
      1,371
      I was wrong about the 7th place finish on the road course...it was actually 12th. My stopwatch was apparently optimistic! The other finishing positions are still correct. I think I ended up around 17th in the design challenge segment.

      On the Tilton clutch, remember this is the 5.5" diameter unit, not the 7.25". I've got one of the 7.25 units in my Mustang for several years now...works great! That's the one that will hold 1200 ft lbs of torque. I bought the 5.5 unit used off eBay from an ASA racer who was running a 500hp spec motor. Just wouldn't live a long life at 600hp.

      I'd have to check the 1st gear ratio again...too many numbers in my head. The rear gear is a 3:48. I could have used more gear at Pahrump...only running about 5500 at the end of the backstretch.
      Bret Voelkel
      Director of Innovation Fox Powered Vehicles Group
      Founder/ Former Owner
      RideTech/Air Ride Technologies, Inc.

      How do you spell Impossible?

    3. #3
      Join Date
      May 2007
      Location
      Mooresville, Indiana
      Posts
      1,874
      Country Flag: United States
      Quote Originally Posted by bret View Post
      I was wrong about the 7th place finish on the road course...it was actually 12th. My stopwatch was apparently optimistic! The other finishing positions are still correct. I think I ended up around 17th in the design challenge segment.
      17th in the design segment??? That's the most ridiculous thing I've heard in a while! If not 1st I think it would be a stretch to say the 33 wasn't in the top five. Oh well, Incredible showing nonetheless!

    4. #4
      Join Date
      Oct 2004
      Location
      Indiana
      Posts
      1,371
      Quote Originally Posted by tommycomfort View Post
      17th in the design segment??? That's the most ridiculous thing I've heard in a while! If not 1st I think it would be a stretch to say the 33 wasn't in the top five. Oh well, Incredible showing nonetheless!
      Hehe...well, I can't say I disagree, but it's hard to quantify humans or their opinions. I have to say, the three top picks were truly awesome, certainly well above what I'd consider prudent to put on the track. Worthy choices!

      Thanks for the vote of confidence Tom...always appreciated!
      Bret Voelkel
      Director of Innovation Fox Powered Vehicles Group
      Founder/ Former Owner
      RideTech/Air Ride Technologies, Inc.

      How do you spell Impossible?

    5. #5
      Join Date
      Oct 2004
      Location
      Indiana
      Posts
      1,371
      On the Tilton clutch...it was a 5.5 double disc, not a triple. That is why the lower torque rating. Remember that torque rating is when everything is fresh and perfect. The first time you run the car the torque capacity will deteriorate some due to disc wear and the resulting increasing clearances.
      Bret Voelkel
      Director of Innovation Fox Powered Vehicles Group
      Founder/ Former Owner
      RideTech/Air Ride Technologies, Inc.

      How do you spell Impossible?

    6. #6
      Join Date
      Apr 2011
      Location
      mass
      Posts
      493
      Country Flag: United States
      Quote Originally Posted by bret View Post
      Hehe...well, I can't say I disagree, but it's hard to quantify humans or their opinions. I have to say, the three top picks were truly awesome, certainly well above what I'd consider prudent to put on the track. Worthy choices!

      Thanks for the vote of confidence Tom...always appreciated!
      Couldent agree with tom more about the 17th place. Thier was some REAL nice cars but the level of fabrication and attention to detail is truly a piece a art. I looked at your car over 5 different times during SEMA and optima and ever time i saw something different. I got to say thanks for spending the time talking to us during sema and it was a blast to watch you guys run the car in vegas.




    Advertise on Pro-Touring.com