Results 1 to 13 of 13
Thread: Building scratch frame
Threaded View
-
12-07-2011 #5
Registered User
- Join Date
- May 2010
- Posts
- 14
The first plan was to cut the front stub off and rear suspension from the C4 and weld it to the frame I have. Then the other ideas set in and it started to appear as though a full scratch build would be better in the long run. Here are some of the thoughts of why going to an all new frame came to be.
1. Old frame will need to be sandblasted
2. Will need to box frame
3. Cross bracing with steel exhaust cut outs and driveshaft loop
4. Fabricate new front frame horns, mounts and core support
5. Fabricate new rear IRS mounts and rear cargo area
By the time everything is done very little will be left of the old frame and of that it will be rewelded ground ect, and still look old. If you look at the work that has been done on Widowmaker by Tim to his frame you understand.
-





Reply With Quote



