Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Results 1 to 13 of 13

    Threaded View

    1. #4
      Join Date
      Oct 2009
      Location
      New Derry, PA
      Posts
      1,265
      Country Flag: United States
      Quote Originally Posted by DaveJS View Post
      I have an extra frame from another wagon I scrapped out, it looks stright enough. Unless I get I get some laser and build a big killer jig no way to really check squreness. I have the C4 stiiting as a bare roller tube, they body and frame are grafted together at the factory.
      Off the top of my head the C4 frame where it flairs out to the rocker is about a total of 1" wider then the A Body. The C4 Suspension does not just "bolt up" or "Fab" right in as some might think. I looked at Schwartz, Alston, Hot Rod Factory and they are all out of my price range being married with children. A local company does rectangular tube bending and can bend the entire frame in 2X3 mild steel if I have prints and even less if I have a Solid Works 3D model for rapid design. Rough estimate was $600-$750 for metal and another $600-$750 for bending. Total price even going over is aprx. $2000, another company up does metal fab and welding. They have slow time after construction season and can fixture and weld the frame up holding it square for as the manager stated $500-$750.
      I did try talking to a few of the companies that do make frames and they will either sell me a partial kit or custome built parts on the low side of $8500. So if on the high side each local shops charging $1000 I'm still way under aftermarket frames.
      The rear is no big deal to mount to a custom frame. You might consider using the complete C4 front stub to save a lot of figuring for all the mounts.



      The benefit to using the stock A-body rails is all the body mounts are there and you know they fit. That is where we run into the biggest problems in building full frames; the body mounts need to run right THROUGH the rails in some cases.

      Ray Kaufman - Wyotech Chassis Fab and High Performance Instructor. Words of Wisdom from an old master... at Asylum Custom Interiors website





    Advertise on Pro-Touring.com