Installing Tru Turn

[Bad94]

I have dse upper ans lower arms with the tru turn. I will have to look at my notes and see what im running.

[mdprovee]

If I remember correctly, I have .5 degrees camber, 5 degrees caster, and I am not sure on the toe. Nothing noted on the alingment sheet about being difficult.

I plan to go to a autocross on Feb 19, so we will see how it goes.

[mdprovee]

OK let me start by saying I am VERY NEW to autocrossing so these are beginners comments. Before I, like all early Camaros, had understeer. You could feel it when cornering, and had to regulate speed because of it.

Well yesterday was mt first autocross, and what a difference. First run I tried to go through learning the feel of the new system. Now I have oversteer to deal with, I had NO understeer. So second run, I lower rear tire pressure to get a better bite. I pushed it harder, and there was no understeer, just went where you point the wheels. I pushed so hard spun out at the end. Third time, I tried to just go clean and smooth, tried going faster. It was my fastest time.

Again, this system made a HUGE difference in the front end, it turns now instead of pushing. I would give this a big thumbs up, as long as you know about the header clearance.

Also ridetech was great to work with, always had suggestion, answers, and very prompt. I will conside their rear suspension based on their customer support alone.

Thanks Vince too, as always you are a great help.

[MrQuick]

way to go mike, glad the system works and now the tuning begins. Always happy to help where I can.

[TT302Z28]

Glad to see positive feedback about a vendor and not always the negative from a guy who just joined to gripe.

Hmm...wait a second, it does seem to always be ridetech everyone so positive about. It must have been those free tee shirts! It's a conspiracy!