Rear Disc Brake Setup for a Lowered G-Body

[BulldawgMusclecars]

For anyone wanting to run 4th Gen F-body rear discs on a G-body rear, its not that bad. You have to cut the u-shaped part off the housing, and drill a couple holes using the e-brake backing plate as a template, but thats not too hard or time consuming. The shocks need to be moved slightly inboard, too...the brackets on the rearend are normally beefy enough that this ins't a big deal, and the change in geometry is negligible. Getting the e-brake cables worked out is the worst part.