Speedtech Subframe?

[ProTour69Bird]

The adjustment is in the upper control arm mounting, there is the original location the guildstrand location as well the arm can be "finetuned" between the two locations.. this allows you to fine tune your camber gain. gotcha. i saw it had the gulstrand mod, didnt know you could use stock also.

The material used is all .125 except for some critical areas the upper control arm mounts are 5/16 with 5/16 gussets. the body mounts, front frame horns and lower control arm mounts are 3/16. Awesome, the more and more i examine my frame...... the more and more i want your sub.

The coil overs that come are QA1's 9.5" compressed 12 5/8 extended with a ride height of 10 3/4-11 1/4 using a 1/2 x 1.25 wide upper mount and a T bar lower mount. we now have Ride tech available as well. the qa1's use a 9" spring. Is the upper coilover mount included with the bare Sub? Whats your spring rates? I was gonna start off in the 650-750lb range

The manual rack is 3 turns lock to lock and has 6" of travel. sorry no actual Ratio it is made by Unisteer.

On the arms that should work fine. sway bar ???? I really like my UCA's, no need for shims, completely adjustable, and pretty light weight. Sway bar will be hard to figure out until I have this sub.

The spindles are 6.5lb lighter than a comparable disk brake spindle both fully loaded. The spindles DO NOT change the track width from stock 59.5" Won't the wheel end up to close to the frame rails? I thought that positive offset wheels needed the extra adaptor to push the wheels <OUT>.

Have you ever done any track driving with any test cars? Just wondering, does this sub allow full "steering degree"(i dont know what to call this) with 295's, or are there steering limiters on the lower arms? I'm just thinking of future track driving when i wont need all the "steering degrees" for street driving, how wide a tire could squeeze up front and still turn? track daze would be fun with 305-315's on the front!!!

The delivery time on the sub frames is normally 1 2 weeks, We do not keep the manual rack in stock so that would need to be ordered. Right on, dont you ship out of sumas?

Looks like you got yourself a near future customer.
-Brian