Speedtech Subframe?

[killer69]

Rob where do you have the alignment set now?

[rob07002]

I'll check my notes and get back to you. Thanks

[rob07002]

Rob where do you have the alignment set now?

I pretty much went with the Unisteer specs.

Toe: 1/16"
Camber: 1/4 degree positive
Caster: 1.5 degree positive

[killer69]

I pretty much went with the Unisteer specs.

Toe: 1/16"
Camber: 1/4 degree positive
Caster: 1.5 degree positive

for an agressive street, mild autoX setting try
toe is probably ok
Camber -3/4
caster +4.5 -5
that will be better.

MAKE SURE THE GUY DOING THE ALIGNMENT KONOW WHAT HE IS DOING!!!!
seems most guys that use the fancy machines have no real idea what they are even doing,
They punch in the car and the machine can only tell them what the factory setting is.............. like your specs that look pretty close to factory.

if you can find a race shop espesially a road raceshop that will do the alignment

[TheJDMan]

Blake,
Does the complete subframe include spindles? I was reading the product page and it does not specifically say.

[rob07002]

for an agressive street, mild autoX setting try
toe is probably ok
Camber -3/4
caster +4.5 -5
that will be better.

MAKE SURE THE GUY DOING THE ALIGNMENT KONOW WHAT HE IS DOING!!!!
seems most guys that use the fancy machines have no real idea what they are even doing,
They punch in the car and the machine can only tell them what the factory setting is.............. like your specs that look pretty close to factory.

if you can find a race shop espesially a road raceshop that will do the alignment

Thanks Blake. I'll give this a try.

[TBART70]

I pretty much went with the Unisteer specs.

Toe: 1/16"
Camber: 1/4 degree positive
Caster: 1.5 degree positive

Where in NJ are you. I align these things all the time

[rob07002]

Where in NJ are you. I align these things all the time

I'm in Old Bridge

[TBART70]

I'm up north. sorry