Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Results 1 to 20 of 61

    Hybrid View

    1. #1
      Join Date
      Mar 2005
      Location
      St George Utah
      Posts
      1,243
      Country Flag: United States
      Quote Originally Posted by ProTour69Bird View Post
      "• Extra adjustments built into the frame to fine tune your suspension." what kind of adjustments?

      What gauge material is the subs construction?

      What length coilovers can be used with this sub? gonna run koni 3012's all around

      Whats the manual ratio? Did you use any particular companies rack, if so, whose?

      On the adjustable SPC's i can turn the forward bend of the arm inward so they look similar to your hi clearance uppers. i was planning on setting up a custom sway bar with splined ends and figure out what style end links will give me the most clearance(similar to art morrison and C5's)

      I'm assuming the 6.5bs is based on your spindles, they look like they stick out further than most. Will I still need to run wheel adaptors with my ATS spindle? I have C6 ZR1 wheels, I was planning on using wheel adaptors to correctly place the wheels in the wheel wells. 2" adaptors is what I figured to compensate a 275with 6.8"bs, close but a little shy to make up the bs difference. Now with 295's, probably a little thinner adaptor.

      Body mounts were done one side at a time, so 3points were always attached. Should be just fine with the little bit I can fudge around with the solid mounts.

      So does getting one of these take as long as the spindles, or are they more readily available and in stock. Glad i'm in washington, could i just pick it up???

      thanks Blake
      The adjustment is in the upper control arm mounting, there is the original location the guildstrand location as well the arm can be "finetuned" between the two locations.. this allows you to fine tune your camber gain.

      The material used is all .125 except for some critical areas the upper control arm mounts are 5/16 with 5/16 gussets. the body mounts, front frame horns and lower control arm mounts are 3/16.

      The coil overs that come are QA1's 9.5" compressed 12 5/8 extended with a ride height of 10 3/4-11 1/4 using a 1/2 x 1.25 wide upper mount and a T bar lower mount. we now have Ride tech available as well. the qa1's use a 9" spring.



      The manual rack is 3 turns lock to lock and has 6" of travel. sorry no actual Ratio it is made by Unisteer

      On the arms that should work fine. sway bar ????

      The spindles are 6.5lb lighter than a comparable disk brake spindle both fully loaded. The spindles DO NOT change the track width from stock 59.5"

      The delivery time on the sub frames is normally 1 2 weeks, We do not keep the manual rack in stock so that would need to be ordered
      Blake Foster
      www.speedtechperformance.com
      435-628-4300
      St. George Utah.
      it's always sunny here.


    2. #2
      Join Date
      Mar 2006
      Location
      rainy ass NW
      Posts
      74
      Quote Originally Posted by killer69 View Post
      The adjustment is in the upper control arm mounting, there is the original location the guildstrand location as well the arm can be "finetuned" between the two locations.. this allows you to fine tune your camber gain. gotcha. i saw it had the gulstrand mod, didnt know you could use stock also.

      The material used is all .125 except for some critical areas the upper control arm mounts are 5/16 with 5/16 gussets. the body mounts, front frame horns and lower control arm mounts are 3/16. Awesome, the more and more i examine my frame...... the more and more i want your sub.

      The coil overs that come are QA1's 9.5" compressed 12 5/8 extended with a ride height of 10 3/4-11 1/4 using a 1/2 x 1.25 wide upper mount and a T bar lower mount. we now have Ride tech available as well. the qa1's use a 9" spring. Is the upper coilover mount included with the bare Sub? Whats your spring rates? I was gonna start off in the 650-750lb range

      The manual rack is 3 turns lock to lock and has 6" of travel. sorry no actual Ratio it is made by Unisteer.

      On the arms that should work fine. sway bar ???? I really like my UCA's, no need for shims, completely adjustable, and pretty light weight. Sway bar will be hard to figure out until I have this sub.

      The spindles are 6.5lb lighter than a comparable disk brake spindle both fully loaded. The spindles DO NOT change the track width from stock 59.5" Won't the wheel end up to close to the frame rails? I thought that positive offset wheels needed the extra adaptor to push the wheels <OUT>.

      Have you ever done any track driving with any test cars? Just wondering, does this sub allow full "steering degree"(i dont know what to call this) with 295's, or are there steering limiters on the lower arms? I'm just thinking of future track driving when i wont need all the "steering degrees" for street driving, how wide a tire could squeeze up front and still turn? track daze would be fun with 305-315's on the front!!!

      The delivery time on the sub frames is normally 1 2 weeks, We do not keep the manual rack in stock so that would need to be ordered. Right on, dont you ship out of sumas?
      Looks like you got yourself a near future customer.
      -Brian

      '69 Figherbird
      beauty's not in the budget




    Advertise on Pro-Touring.com