Aluminum Block 427 Install

[Gitter Dun]

You have plenty of crancase ventilation there. Especially since you haven't even raced it. The engine made good power. Hopefully it's just leaks.

Thanks. I'm used to seeing a little leaking but after the first time I fired it up after about 5 minutes of idling I had a 4" diameter puddle under my car coming dead center between the bellhousing and the engine. That is way to much. Also, the oil pan bolts were way to loose.

After pulling the pan the gasket and Permatex were practically falling off. He definitely did not clean the surfaces properly before installing pan gaskets.