Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Results 1 to 11 of 11

    Threaded View

    1. #5
      Join Date
      Jul 2008
      Posts
      92
      Country Flag: United States
      Thicker paint is not a good idea. You want even coverage as thin as possible. Thick paint turns chips into craters.

      Don't color sand the base before clearing, if you are having to do this, either it's shot wrong, or what's underneath is bad work. As already stateed you will definetly have to sand it now, though.

      You can either base, flash and 3 coats of clear to sand and buff.

      Or you can base, flash, shoot 2 or 3 coats of clear. Let it dry. Block the car down with something like an 800, even seen this done in 600. Then go back and shoot 3 more coats of clear.



      That will give you plenty to block sand and buff without burning through.

      To me, blocking out an initial 2 coats to a perfectly flat surface makes the final clear process much easier. But that is probably more a product of me not having to then sand the clear with anything less than 1500grit. I suck at getting out anything more course than that.
      Mark Pearce

      Vini Vidi Vici





    Advertise on Pro-Touring.com