Results 1 to 20 of 63
Thread: 1967 Barracuda Fastback
Hybrid View
-
11-19-2009 #1
Registered User
- Join Date
- Jan 2007
- Location
- Gilbert, AZ
- Posts
- 199
I like where you're going with this! Id go for an 8.75" rear though, unless you put in a new center section thats built a bit beefier.
Travis
1968 Mustang Coupe WideBody
1968 Barracuda Formula S Sold 10/10/10
My Barracuda.
It's more than just an old car,
It's my one freedom.
-
11-19-2009 #2
New to Pro-Touring
- Join Date
- Nov 2009
- Posts
- 38
About the rear, Im planning on rebuilding it and upgrading it with an LPW rear end cover that supports the main caps, upgrading the front yoke to accept the 7290 yoke and installing a positraction center and a ring and pinion that can handle some horse power. If it brakes oh well then i'll get a bigger rear end either 8 3/4 or Dana 60... as far as rear brakes go, i do have a set of 11" x 2.5" rear drums but im now thinking about installing a set of rear discs brakes from a 1993 through 1998 jeep grand cherokee. These jeeps have 8 1/4 rear ends with 5 x 4.5" bolt pattern, so the rear discs are a bolt on deal with parts availible over the counter.
Reply With Quote
