Results 1 to 20 of 28
Threaded View
-
06-16-2009 #28
Registered User
- Join Date
- Oct 2004
- Location
- IL/TN
- Posts
- 908
well you need to check again something is not right, our arms are 1/4 shorter than the stock ones that would need LESS shims to get the camber setting, I do have a car here that has ove 3/4" of shims on one side just to get to the stock setting, so I can see if you have a car that is way of you could run short on the studs with the thick steel shaft
https://www.protouringf-body.com "doing what they say can't be done"
-
Reply With Quote
