Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Results 1 to 20 of 28

    Threaded View

    1. #1
      Join Date
      Jan 2007
      Location
      Pittsburgh, PA
      Posts
      59

      Am I missing something? Alignment problem

      I bought the SPC alignment tool and a box of shims. Started to do my alignment and just cannot seem to get the camber set even close. Car is a 78 TA, Hotchkis springs, Pro-Touring F-body UCA's, B-body spindles. When I started, there were a few shims in the rear bolt, none at front and it was at 3.5' (assuming I'm reading right, center of bubble, like a level, right?). After much fighting, I have four 1/8" shims in the front and rear bolts and am still at just less than 1'. I'm pretty much out of bolt length here to go further. I havent even gotten to Caster yet, but there is 5' built into the arms. So is this normal to need so many shims? Or longer bolts? Am I going in the correct order here? This is my first DIY alignment, so any help at all would be great. Thanks in advance.
      Terry

      78 TA, 400 4spd
      72 Chevelle, 454 4spd
      72 Demon
      72 Dart
      70 Dart
      70 Charger
      69 Roadrunner
      55 Chevy
      70 Duster
      68 GTO
      ...ain't projects fun?





    Advertise on Pro-Touring.com