Project Never Enough

[wellis77]

Good work, that's look real nice.

[dslhtrdr]

I agree, you're doing a pretty good job. I must admit, I'm a little envious of your progress!

22k in parts! That's a big chunk of change to drop, but you spent it well in my opinion. Even though I just replaced the stock rail in my car, I'm considering chopping them all out and replacing them with the same morrison frame that you have. It looks damn good, and much stronger, which is something that I'm really going to need with the amount of torque my dmax will be putting to the ground. Did it come with the 9" in the pics? And how is it mounted to the body?

[camaro2nv]

Magnum trans came today:thumbsup: But I guess the cluth and flywheel is on BO. Story of my life. I also got the other tub done. I want to weld em in sooo bad but I know its best to wait for my brakes and axles so I can get the wheels under the car first to make sure everything is a ok.

[camaro2nv]

I decided to change the color,again lol. For now this is it. With all the CF bits it should look really nice.

[camaro2nv]

Parts update, I got the ATS Spindles and oil pan today. The Ididit is coming tomorrow along with the axles and center section. I also placed a order for the AutoKraft engine mounts for the LS2. Parts are coming in slower them a turtle! I made a change on the brakes to the greatest and latest,lol.
I started to put the speedtech together when I noticed that the last owner didnt include any nuts or bolts. So tomorrow Ill go pick some up. Ill have a updated picture tomorrow.

['70rs]

Coming along really well. I'm curious about the brake upgrade though, any hints?

[camaro2nv]

The brakes are Wilwoods but I wanted em BIG! Im big on wheels and brakes. With five spoke wheels you need em big!
I had to run to the hardware store today three times to get missing bolts that the last owner didnt include.
I took off a hour early to get the Subframe together. Turns out Im missing a couple key bolts for the sway bar. But all in all its very close.

[camaro2nv]

Got home to find my Detroit tru trac came today along with the axles. Just got finished putting it in. Now Im just waiting for my brakes so I can put the wheels on this bad boy!

[tones2SS]

Very cool. Looks like you're coming down the home stretch.
Keep us posted.

[dslhtrdr]

Keep up the good work! Your progress on the car makes me feel like a lazy a** when it comes to mine. I like the direction of it a lot. The more pics the better.

[camaro2nv]

Well back in the garage! We had a baby two weeks ago so the project is moving super slow now. With that said the baby has been napping so I sneak away to do some work.
Im still waiting for all my other parts to roll in. Willwood sent me the rears but Im still waiting on the fronts. These are the W4A, from what Frank told me these are the first to go on a rear or a car. They are BIG! The rotors are 14in and calipers are 11in long. I picked black because I want them to match the car color. So they will be painted to match. The fronts are W6A with a 14.25 rotor. Ill post them once I get em.

I have to do more work to get the rear wheels on. Seems the bore size is off by a hair! Its very close, I might just do some sanding to get them to go on.

[camaro2nv]

Ok Ok so I could wait, I had to put a wheel on. I did a little sanding, not much and it slipped on. My axle if off but I wanted to get a wheel on,lol

[wellis77]

Looks good. What are the specs on your rim/tire?

[1968CamaroSS_Sam]

The car is coming along great.

[badbu68]

Love the project, its looking nicer with every post!

[camaro2nv]

Looks good. What are the specs on your rim/tire?

Thanks!
20x12
19x10
345/25/20
275/30/19

[Motown 454]

The car looks great , nice wheels. Those are some big brakes! Nice work on a sweet project.

[19sixtynine]

Amazing work, I CAN NOT wait to see this car done!...although I really enjoy the "watching it get done" part too....

[colt zantop]

wow! awesome project..nice work!

[Green70]

you sir are a madman! keep updating cuz this thing is sweeet!