Rotor differences C5 vs. C6?

[Apogee]

Matt, one thing to note since you're modifying your hubs is that due to the C6 rotor hat design, cut the flange to 5.94" outside diameter with a 1/8" x 45 degree chamfer on the face...then you should be good with any C5 or C6 rotor.

Tobin
KORE3

[bochnak]

Matt, one thing to note since you're modifying your hubs is that due to the C6 rotor hat design, cut the flange to 5.94" outside diameter with a 1/8" x 45 degree chamfer on the face...then you should be good with any C5 or C6 rotor.

Tobin
KORE3

Hey, I still remember the first time you told me..LOL:

https://www.pro-touring.com/forum/sh...826#post391826

What fit do you shoot for when drilling and reaming for studs?

For example, I have a 12mm stud w/ .489 body and .503 knurl. I have access to a .492 & .495 reamer. I was thinking the .492.

Thanks for sharing that info, and when the time comes, I'll be giving you a call for some brackets.