Results 1 to 4 of 4
Thread: Wilwood rear brakes
-
05-27-2009 #1
Starting The Transformation
- Join Date
- Jan 2009
- Posts
- 343
Wilwood rear brakes
ok so i'm mocking up my rear brakes on my camaro and it appers that the spacer that mounts the caliper bracket to the inner drumm is to think? is this normal or have i done something wrong?
Josey Sandy
have'n a badass car and not driving it is like having a playboy model as a wife and not......well, you know.
-
05-27-2009 #2
Banned
- Join Date
- Aug 2003
- Location
- Orlando, FL
- Posts
- 8,745
There are multiple washers in the kit so you can shim the caliper and / or the caliper bracket in and out to center the caliper on the toror. Just use one of the smaller washers, or a combination of washers till you get the correct fit. When it is rght the caliper should be balanced / equal on either side of the rotor
05-27-2009 #3
Starting The Transformation
- Join Date
- Jan 2009
- Posts
- 343
thats just it its set to far away from the disk. it needs to move in
Josey Sandy
have'n a badass car and not driving it is like having a playboy model as a wife and not......well, you know.
05-27-2009 #4
Banned
- Join Date
- Aug 2003
- Location
- Orlando, FL
- Posts
- 8,745
So can you remove some washers? Do you have the right kit? What axle do you have? What ends? What is the offset of your axle? What kit do you have?
Reply With Quote
