My LS1 e-brake setup

[SamHatco]

Thought I would share how I setup the LS1 e-brake cable on my 69 bird. I used two left side calipers and brackets. This allowed me clear the shock on the passenger side. I then flipped the e-brake lever so it would pull from the rear like the driver side. Routed the cables up to the trans tunnel and fabbed a bracket to hold the outer cable sheaths. I then connected the cable to the gto e-brake cable mechanism. It worked out pretty well, nice and neat and the brakes are rock solid.




This the routing of the e-brake cables







Sam