Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Results 121 to 140 of 151

    Thread: 68 GTO Project

    Threaded View

    1. #22
      Join Date
      Apr 2001
      Location
      The City of Fountains
      Posts
      16,130
      Country Flag: United States
      Quote Originally Posted by Alain V. View Post
      Andrew,
      I just finished going through all 30 pages of your build, and found your driveshaft pics.



      That is a good idea (using a CV). BMW has done this on some of their sedans for years,,,,but on the bimmer they have a fairly high failure rate. (the CV wears out on them causing terrible noise & vibration) I've seen them fail with 60k miles on them,,,and I'm pretty sure these folks don't do any drag racing with sticky tires.

      I'm not saying that the CV is a bad idea to use,,,,,but I think it would probably be a good idea to put it on your list of things to periodically check when doing maintenance on your car.

      I'm a mercedes tech by trade(the shop I work at specializes in german brands)
      I am not expecting the CV to last forever. Even U-joints need to be replaced periodically. Honestly, if I can get 60,000 miles out of it, I would be thrilled. There is an Australian company called Holinger Engineering. They actually make a pinion yoke for the Ford 9" center section that takes a CV. It is entirely possible that at some point I may have a IRS in the GTO, at which time I am going to get a driveshaft that uses the CVs at both ends.

      Andrew
      1970 GTO Version 3.0
      1967 Cougar build
      GM High-Tech Performance feature
      My YouTube Channel Please Subscribe!
      Instagram @dr__efi
      I deliver what EFI promises.
      Remote Holley EFI tuning.
      Please get in touch if I can be of service.

      "You were the gun, your voice was the trigger, your bravery was the barrel, your eyes were the bullets." ~ Her





    Advertise on Pro-Touring.com