Body Gaps

[astroracer]

It will depend on the car... Build tolerance is the determining factor. Being that the rockers are not adjustable and the fenders float around on the subframe, there is no hard number you can use to set up this gap. All you can do is get it as tight as you can while aligning the rest of the clip. Leaving the subframe "loose" at the initial alignment can help as you can pull it rearward a bit to close up the gap (if everything else allows that adjustment). Pay close attention to the door gaps and use those as your guide. If you still don't like the lower fender gap you can always add a bit of steel to the forward edge to close it up...
Mark