Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Page 3 of 3 FirstFirst 1 2 3
    Results 41 to 49 of 49
    1. #41
      Join Date
      Aug 2004
      Posts
      957
      I as many other early Mustang guys have been going nuts over what front suspension to go with....big $$$ and to many choices not enought real info of what works. Unfotunately a set up like Prestons is not very easy or practical on the street.
      So, what, specifically, are you guys looking for? The early Mustangs respond really well to the "Shelby Mod," which is very similar to the Gulstrand mod that addresses the front geometry through a slight roll center correction, but more importantly a significant change in camber gain in bump/roll. Lots of VERY fast Shelby Mustangs out there using basically stock stuff up front.

      You can bling things out with some of the pimpy control arms, etc, for a fee. Coil-overs are a nice update, but not free. Global, TCP, and some other newcomers fall into this category.

      If you are really core, you can go a step further with the Grigg's stuff, which basically grafts a late model Mustang (sans Mac-struts) onto your car, and does a bit to correct geometry further. REALLY not cheap, and my biased opinion questions if you really get what you pay for here.

      If you are nuts, you can study, study, study, ask questions, study.... Repeat whole process three times, and go it on your own. By far, the most gratifying, but most expensive (tools, etc), and the highest risk.

      Cobra Automotive on the East Coast helps MANY fast early vintage correct Mustangs go really, really fast. I'd guess that there are not more than a handful of cars that could beat a prep'd GT-350R on the road course, which states a lot after almost 40 years. 'cept, of course, Preston. Or my 65, whenever it gets done. It will. Someday. Promise.

      Mark



    2. #42
      Join Date
      Dec 2004
      Location
      Beaufort , NC
      Posts
      1,849
      Country Flag: United States
      Thanks Mean,I really like the GW U/LCA setup but I dont know if the cost is justified for a street only car that will never see a road course. I have read that in some cases the "Shelby drop" may cause upper ball joint bind. I have seen posts on how to mod the lower with a spherical(SIC?) bearing...thats the whole prob. to many options.I am going to check out Cobra Automotive to see what they offer.

    3. #43
      Join Date
      Dec 2004
      Location
      Sarasota, Fl
      Posts
      1,717
      I don't know if this is useful, but I've collected some of my thoughts about basic/reasonable vintage Mustang suspension upgrades which I hope might be useful to anyone just looking for ideas... check it here: Suspension mod pages

    4. #44
      Join Date
      Jun 2003
      Location
      Chicagoland
      Posts
      835
      Quote Originally Posted by Restomod
      Thanks Mean,I really like the GW U/LCA setup but I dont know if the cost is justified for a street only car that will never see a road course. I have read that in some cases the "Shelby drop" may cause upper ball joint bind.......
      I am pretty sure that the GW and TCP control arms account for the new ball joint angle associated with the Shelby drop.
      William Rouleau
      Project PonySnake - '67 Mustang Fastback

    5. #45
      Join Date
      Dec 2004
      Location
      Beaufort , NC
      Posts
      1,849
      Country Flag: United States
      Yes they do...but I dont think I need them on a street only car and I have been looking for a more reasonable upgrade,preformance and price wise. Thanks Buddha your research helped quite a bit!!!

    6. #46
      Join Date
      May 2002
      Location
      Northern California
      Posts
      10,716
      Country Flag: United States
      Nice write up DB, great info.
      Welcome to the site Preston, i've been following your car and its done well,not to mention looks good.
      Mark is right,some very fast Mustang are running very close to stock suspensions.I built a CP car a few years back and was close to stock with the exception of coil overs and the Shelby mod and it was very fast. I think I would like to do an updated style suspensions for increased tunability and hell to look good in the grass waiting for the hook truck. I think I have something against lower control bars and strut rods?
      MrQuick ΜΟΛ'ΩΝ ΛΑΒ'Ε


    7. #47
      Join Date
      Jan 2005
      Posts
      183
      Quote Originally Posted by ChaseN
      Yeah, a good old pushrod is looking like the way to go. So would a turbo 351w meet my 600 fwhp goal? Should I go TT or single turbo? Thanks
      Did you type FWHP? Dude, you're driving the wrong wheels! Go to one of the ricer boards if you want that, LOL! I assume you meant RWHP, but it's funny anyway...

      FYI, a turbo 351 will get you where you need to go, even a turbo 302 will get you there... but for the money spent, I'd go with as big of a stroker as you could afford. The larger the bottom end, the less likely you are to be worried about turbo lag and the less likely you are to have to spend more money to overcome those lost cubes with boost (not to mention running the parts harder to get there).

      Looking back in my old bathroom top ten files of MM&FF (Muscle Mustang & Fast Fords for you hard core Chevy buffs) I see "Having a Grand Time" and "Having a Grand Time part 2" articles in the July & August 2003. They built a stoker 327 with 1000HP!!!

      Ohhh, quick search online for more MM&FF articles with boost related stories and I found this page... http://www.turbochargedpower.com/magazine_articles.htm with many different magazines listed. Turbo power is everywhere!!!
      2008 MazdaSpeed 3 GT daily driver
      301 WHP, many mods
      255/35/18 tires and 18x9 wheels to come

      No PT project yet :-(

    8. #48
      Join Date
      Jan 2005
      Posts
      183
      BTW, if you're worried about the extra front end weight, get an aluminum block upgrade for only about $2K more on top of a World Products crate engine... or pull an STS move and put the turbo in the back...
      2008 MazdaSpeed 3 GT daily driver
      301 WHP, many mods
      255/35/18 tires and 18x9 wheels to come

      No PT project yet :-(

    9. #49
      Join Date
      Jan 2003
      Location
      College Station, TX
      Posts
      421
      Quote Originally Posted by bnoon
      Did you type FWHP? Dude, you're driving the wrong wheels! Go to one of the ricer boards if you want that, LOL! I assume you meant RWHP, but it's funny anyway...
      By FWHP I'm sure he meant FlyWheel Horse Power.
      -Brian
      <--- Artist formerly known as BlownSS502

    Page 3 of 3 FirstFirst 1 2 3



    Advertise on Pro-Touring.com