Control Arms

[Mathius]

its a matter of the strength. Tig is a much more thourough welding process IF you do it right with a combination of rod,heat,tungsten,and gas.

FALSE!



I tried being polite.

Please stop spreading false information!

There is nothing stronger about a TIG weld than any other kind of weld. If you are using the proper filler rod, wire, whatever for the material you are working, and you use the appropriate heat settings for the material you are welding, you will get the same amount of strength for either piece of metal.

A TIG welder does NOT make a "stronger weld" just because you're more comfortable with it.

If this were true, they would stop making the machines that run the other weld processes.

You do realize that an Arc/Stick welder is used most in construction? The bridges you drive over every day are held up with welds done with an Arc welder. The office buildings you go into, skyscrapers, etc. are held up with this process!

The car you drive every day was factory spot welded and machine MIG welded!

You're spreading false information!

Mathius