Results 1 to 20 of 22
Thread: Heidts Rear Suspension
Hybrid View
-
08-21-2006 #1
Full Blown G-Machiner
- Join Date
- Sep 2004
- Location
- PA.
- Posts
- 935
I don`t care for the use of poly bushings but it`s one of the only 4 link rear conversions for early Camaros that has much anti squat built into it. On paper at least it should launch better than systems with a typical street rod parallel "4 bar" configuration. I admit to never having tried one in a Camaro but I`ve worked with plenty of them in street rods and traction is often an issue despite some of those cars having a lot more rear weight bias than a Camaro and 33x21.5 MTs. The RC height looks pretty good too. If Heidts would loose the poly and use Johnny joints or something similar IMO they`d be onto something in spite of the relatively short upper links. Mark SC&C
-
08-22-2006 #2
Registered User
- Join Date
- Aug 2005
- Posts
- 64
Anyone else?
08-23-2006 #3
Registered User
- Join Date
- Aug 2004
- Posts
- 957
Try doing a search on the unit, it has certainly been discussed here in the past if I am not mistaken.
Mark
Reply With Quote
