The BAD AST Project - Faze II

[JayinMI]

Thanks,
Glad to entertain...

I modified my crimper yesterday so it will easily clamp to the welding bench. Frees up a hand for holding the wire in place.
I marked out a pattern for a couple of drilled and tapped holes in the head.

I will be screwing it to this piece of 1/4" plate with a couple of drilled and counter bored holes.

I clamped the tool in the drill press vise and drilled two holes out to .149 for tapping for a #10-32 screw.

Here is the plate getting drilled and counter bored.

Test fit. Bolted up nice and was very sturdy. This will work great when I get to crimping all of the van cables...


Cleaned and painted the plate.

This will be good to go and, if I need it do any crimps in tight places, the plate will come right off.
Mark

Genius! I had a similar crimper and one day it fell off the counter and now it won't build pressure. I may order another and steal this idea.



Jay