The BAD AST Project - Faze II

[astroracer]

I also got some more routing done. I drilled two holes in the right rear corner for snap bushings. One of which will carry the 1/0 negative cable to ground the frame and body and another for the fuel pump wires.
Here is a long view of the corner.

Here is a close up.

Looking from underneath you can see the routing for the fuel pump wires. I REALLY lucked out here... All of the holes in the brackets were there AND they all were the perfect size for the snap bushings... Very nice.

Of course all of this will get cleaned up and painted before the wires are installed for keeps. I will also cover the wires with loom before final install.
Thanks for looking.
Mark