Planning Fuel System

[John McIntire]

Ok guys, here it goes. I've been planning out my fuel system in my head. Let me know if this will work. I plan on coming out of the fuel cell and running the feed up the passenger side frame rail up to the back of the passenger side fuel rail. From there it'll run up the fuel rail towards the front, crossover to the front of the drivers side fuel rail over the thermostat housing. Then at the back of the drivers side fuel rail, I plan on installing a regulator, and then have the return line run back down the drivers side fuel rail to the fuel cell.
With this design, The fuel rails will always be under pressure and second, it kind of cleans up the install a bit. I'm not too worried about fuel rail "shock" because I'm running sequential.
Let me know what you think!
John