Help Help Help!!!

[navyflyer72]

I was just jumpering teh underdrive pulley pins on my DC controller to give a constant 10% minimum current, when I started the engine the fan did not turn at all, (may be the way I have the DC Controller wired, however the BIG problem I noticed was that my upper radiator hose was being collapsed, as if there was a blockage or something and the walls of the hose were being collapsed. I shut down the engine and checked the radiator fluid level and it was about 3 inches below the cap level (the engine was cold). So I filled the radiator to full and I wanted to see if anyone knew why this might happen before I start the engine again. Problem is I have to leave for a 4 hour trip in this car in about 5 hours, so I am in need of some seriously fast assistance. Thanks.



-George