Pad Knockback Issue

[Sleeper68]

Is it possible that the rear caliper is not centered on the rear rotors and you are running out of caliper float range?

Andrew

That is an interesting point. The caliper is definitely centered on the rotor because it has to be. The pads center it. But it is very possible the caliper is not centered on the available travel of the slider pins. I would hope so since the is was a purchased kit, but I did not check that explicitly.

I'll check it out. Thank you.

Do think a 10psi RPV is too much for rear disc brakes? Wilwood said they sell the 10 psi version for drum brakes typically