Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    View Poll Results: Immediate thoughts???

    Voters
    12. You may not vote on this poll
    • Less Talk More Pictures......

      1 8.33%
    • Take it to the scrap yard....

      0 0%
    • Make it Light Make it Fast!

      10 83.33%
    • This could be interesting.....

      1 8.33%
    Multiple Choice Poll.
    Page 3 of 6 FirstFirst 1 2 3 4 5 6 LastLast
    Results 41 to 60 of 125

    Hybrid View

    1. #1
      Join Date
      Mar 2010
      Location
      AZ
      Posts
      801
      Country Flag: United States
      Are you going to use a set of the double ball joint sway bar end links on this? Love those, but they are bit pricey! What about the ridetech link kit out back?



      P.S. You know we have as site for just the S10s too, right? I'm sure there are a few guys over there that aren't here that would love to see this!
      Robert R.
      1988 S10 blazer 5.0L SBC 700R4 body off build.
      1991 S10 Blazer 4.3L too low daily.
      1975 Cutlass Salon currenlty 350/th350
      Stupidity should be painful.


    2. #2
      Join Date
      Jul 2012
      Location
      Mooresville IN
      Posts
      159
      Country Flag: United States
      Quote Originally Posted by ArtosDracon View Post
      Are you going to use a set of the double ball joint sway bar end links on this? Love those, but they are bit pricey! What about the ridetech link kit out back?

      P.S. You know we have as site for just the S10s too, right? I'm sure there are a few guys over there that aren't here that would love to see this!
      I will be building a special MuscleBar for it and using the PosiLinks that you mention. May look at doing Delrin muscle bar bushings also. If your speaking of pro-tourings10.com I am a member over there and started the build thread there. Not much traffic :-(

    3. #3
      Join Date
      Mar 2010
      Location
      AZ
      Posts
      801
      Country Flag: United States
      Quote Originally Posted by BIGMIKE@ridetech View Post
      I will be building a special MuscleBar for it and using the PosiLinks that you mention. May look at doing Delrin muscle bar bushings also. If your speaking of pro-tourings10.com I am a member over there and started the build thread there. Not much traffic :-(
      Oh, you're Member369, lol. Let me know if you want that changed, I'm one of the admins over there. And no, we don't have much traffic unfortunately, except spam, but we've got a few really great guys, who really know these things and we've managed to save a lot of the old PTS10 site we had, so there's a lot of info over there specific to these.
      Robert R.
      1988 S10 blazer 5.0L SBC 700R4 body off build.
      1991 S10 Blazer 4.3L too low daily.
      1975 Cutlass Salon currenlty 350/th350
      Stupidity should be painful.

    4. #4
      Join Date
      Jul 2012
      Location
      Mooresville IN
      Posts
      159
      Country Flag: United States
      Quote Originally Posted by ArtosDracon View Post
      Oh, you're Member369, lol. Let me know if you want that changed, I'm one of the admins over there. And no, we don't have much traffic unfortunately, except spam, but we've got a few really great guys, who really know these things and we've managed to save a lot of the old PTS10 site we had, so there's a lot of info over there specific to these.
      Member369 is fine with me. I figured if I used a ridetech user name they would think i was trying to advertise which I hope its obvious to everyone thats not the case.

      If I cant get where I need to be with the Modular Muscle bar we do now have spline bar access and I can build a completely one off interchangeable spline bar.

      The work schedule is pretty heavy the next two weeks but i should be able to get my muscle bar fabbed up soon there after.

    5. #5
      Join Date
      Mar 2010
      Location
      AZ
      Posts
      801
      Country Flag: United States
      Quote Originally Posted by BIGMIKE@ridetech View Post
      Member369 is fine with me. I figured if I used a ridetech user name they would think i was trying to advertise which I hope its obvious to everyone thats not the case.

      If I cant get where I need to be with the Modular Muscle bar we do now have spline bar access and I can build a completely one off interchangeable spline bar.

      The work schedule is pretty heavy the next two weeks but i should be able to get my muscle bar fabbed up soon there after.
      If you do develop a splined bar, talk the boss into making it available, I will save up my lunch money for the next couple months if it's 1.25", with pre-bent arms and at least two holes, would really prefer three, in the arms for adjustment. Hell, if you do a .375 wall bar with multiple holes, I'll say right here and how that I will buy one. Won't need the links with the global west LCAs though a set of machined delrin bushings for the frame would save me some serious time on my really old mill.
      Robert R.
      1988 S10 blazer 5.0L SBC 700R4 body off build.
      1991 S10 Blazer 4.3L too low daily.
      1975 Cutlass Salon currenlty 350/th350
      Stupidity should be painful.

    6. #6
      Join Date
      Aug 2012
      Location
      Peoria, AZ
      Posts
      1,758
      Country Flag: United States
      There are a couple of other issues with the sealed roller bearings we can discuss as well if you'd like. First and foremost would be leaks... QP will tell you and everyone else that asks there is no need for an inner axle seal when using a sealed roller bearing in the big Torino style axle housing end. Everyone I know running a QP housing will tell you differently, they ALL leak on the passenger side if you do not put the inner axle seal in before the bearing. Once I found the correct sized inner seals for my axles, that ended my gear oil leaking problem that I put up with for years.

      The A20 style of bearing has an integrated axle seal on the OUTSIDE of the bearing. The A20 bearings come pre-greased and are also of a "sealed" design...but gear oil can still get to them as the seal is outside of the bearing.

      Now, a question I that have not seen answered yet...is the inner seal that keeps the gear oil away from the roller bearing part of the cause of the bearing failures? I don't know...but I know if I had to chose persistent gear oil leaks to keep a susbstandard bearing alive...I'd be looking for another answer (which I did).

      Here is a comparison picture of the two different setups.



      Sealed roller bearing on the left, A20 on new larger dia axles on the right. Notice the seal on the outside of the A20, this gets pressed into the axle end with the retainer clamp and seals around the outside race of the bearing against the axle end as well as around the axle itself. The roller bearing has no seal at all except the black plastic between the outer and inner races you see in my video above.

      Note: the brake offset was wrong in the picture above and I ended up sending the axles back and had the brake offset fixed and new bearings pressed on. While doing this I also had them put the brake backing plate spacer ring on the axle before pressing the new bearings on which is a REAL timesaver when installing the axles around my disc brake kit.

      This is the new axle setup that ended up going in my car...



      One more plus to the A20 setup is the MASSIVE wedding ring that is used to hold the bearing in place when compared to the roller bearing setup. This is the only picture I have of the new ones...I don't have a comparison pic to show the wedding ring on the roller bearing setup, but it is substantially smaller.



      Just trying to help out Mike, from someone that has been there done that with a very similar setup and found the flaws in it already. I'm sure your truck will put every bit of the side loads on your rear tires that I put on mine...knowing the resources you have behind your build.
      Lance
      1985 Monte Carlo SS Street Car

    7. #7
      Join Date
      Apr 2015
      Location
      Rochester NY
      Posts
      13
      Country Flag: United States
      Lovin' it! More trucks of all sizes need to hit the SCCA autoX courses. Back in the 80's there was a truck class but sadly it went away. I race a Nissan Hardbody in Street Prepared and have a blast doing it. The truck always turns heads out there. I will be watching this build!
      Devin
      1995 Nissan Hardbody
      SCCA #61 FSP

    8. #8
      Join Date
      May 2013
      Location
      Moody,Al
      Posts
      91
      Country Flag: United States
      So what happened to this project?

    9. #9
      Join Date
      Jul 2009
      Location
      Sackville, NB, Canada
      Posts
      166
      Country Flag: Canada
      Also keen to see a follow up - I can't believe I missed this thread until now. I'm with ArtosDrakon on the custom swaybar - I would definitely be interested if there was an upgrade over the 33 mm OEM option.
      Tyson
      '95 Firebird Formula: suspension + 315's
      '66 Mustang Coupe, 289

    10. #10
      Join Date
      Oct 2007
      Location
      Union Mo
      Posts
      343
      Country Flag: United States
      Cool build Mike. So the G body stuff is the same as the S10?

    11. #11
      Join Date
      Mar 2012
      Posts
      87
      Country Flag: Canada
      I seem to remember that the g-body springs gave a 1" drop over the s10 springs.

    12. #12
      Join Date
      Jul 2012
      Location
      Mooresville IN
      Posts
      159
      Country Flag: United States
      Quote Originally Posted by eric1967 View Post
      Cool build Mike. So the G body stuff is the same as the S10?
      the Gbody production pieces and S10 pieces are not the same. The Gbody stuff is way more advanced than the s10 when it comes to geometry and track performance. The Gbody true turn setup does work on s10 with a simple bushing and tierod adjuster swap though.

    13. #13
      Join Date
      Apr 2013
      Location
      Phoenix, Arizona
      Posts
      21
      Country Flag: United States
      Quote Originally Posted by BIGMIKE@ridetech View Post
      the Gbody production pieces and S10 pieces are not the same. The Gbody stuff is way more advanced than the s10 when it comes to geometry and track performance. The Gbody true turn setup does work on s10 with a simple bushing and tierod adjuster swap though.
      So will the g body strong arms bolt on to the s10 frame or do modifications need to be made? also will they work with s10 spindles?

    14. #14
      Join Date
      May 2011
      Posts
      16
      Country Flag: United States
      What happened to all the pictures?

    15. #15
      Join Date
      Aug 2009
      Location
      Chandler, Az (from west NE)
      Posts
      240
      Country Flag: United States
      No pics visible?! Any updates?
      Ric

      2002 s10, DD and AutoX.
      1966 Malibu owned since 1971. Drag car converting to track toy!

    16. #16
      Join Date
      Jul 2012
      Location
      Mooresville IN
      Posts
      159
      Country Flag: United States
      Well guys I don't know what happened to all the old pictures but I'm back and the project is underway again.

    17. #17
      Join Date
      Jul 2012
      Location
      Mooresville IN
      Posts
      159
      Country Flag: United States
      In the last updates I was still living in Southern Indiana or had just moved back to Indy and taken a job at Raymond's Performance. That lasted a year and I have officially left the career out of a hobby phase of my life. This means working in the garage is fun again right? Here's some progress from the last few weeks.
      Set up a makeshift seeing table at home.
      Name:  FB_IMG_1484626159855.jpg
Views: 978
Size:  70.7 KB
      Fabbed up a rear underslung clip
      Name:  FB_IMG_1484626141748.jpg
Views: 959
Size:  66.5 KB
      Ohh yeah..... Here's the home shop setup (work in progress)
      Name:  FB_IMG_1484626061242.jpg
Views: 953
Size:  58.6 KB
      And the helpers.
      Name:  FB_IMG_1484626149100.jpg
Views: 948
Size:  53.7 KB

    18. #18
      Join Date
      Jul 2012
      Location
      Mooresville IN
      Posts
      159
      Country Flag: United States
      The stock s10 rails were bobbed right at the rear cab / front bed mount so I rigingly fixed what was left of the stock frame to the table with the rear rails to "properly" mate them.

      Name:  FB_IMG_1484626017054.jpg
Views: 947
Size:  78.5 KB
      Name:  FB_IMG_1484626024337.jpg
Views: 959
Size:  90.2 KB

      Learned a lot while I was at ridetech. One of the biggest things was how much I missed hanging in the shop with my Dad. He was a Mopar guy until my sister and I were born. There's not a day he turns down a chance to come and tinker.
      Name:  FB_IMG_1484625997580.jpg
Views: 954
Size:  74.9 KB

    19. #19
      Join Date
      Jul 2012
      Location
      Mooresville IN
      Posts
      159
      Country Flag: United States
      Once we got tied together I hung it to weld in the bottom side.


      Name:  FB_IMG_1484625967177.jpg
Views: 947
Size:  84.0 KB
      Worked great

      Name:  FB_IMG_1484625961263.jpg
Views: 968
Size:  92.1 KBName:  FB_IMG_1484625961263.jpg
Views: 968
Size:  92.1 KB

      Boxing was all finished so it was back down to ground level.

      Name:  FB_IMG_1484625946074.jpg
Views: 957
Size:  80.4 KB

      2 laser levels, a couple tape measures, and what seemed like 300 measurements later the wheelbase was laid out at 108" and the axle was locked into position with a couple exhaust clamps (NOT DYNO RATED)

      Name:  FB_IMG_1484625922595.jpg
Views: 950
Size:  45.8 KB
      Name:  FB_IMG_1484625912861.jpg
Views: 952
Size:  68.7 KB
      Name:  FB_IMG_1484625917252.jpg
Views: 942
Size:  73.5 KB

      Time for some fun!
      Name:  FB_IMG_1484626035516.jpg
Views: 937
Size:  70.4 KB

    20. #20
      Join Date
      Feb 2010
      Location
      El Segundo, CA
      Posts
      268
      Country Flag: United States
      I love your ingenuity in terms of building and measuring the frame.

    Page 3 of 6 FirstFirst 1 2 3 4 5 6 LastLast



    Advertise on Pro-Touring.com