Ridetech Strong Arms and Tru Turn with Speedtech Chicane and Guldstrand Mod

[Ryanater]

First of all, I don’t mean to disagree with Rod or anyone else. (Especially since they have more experience than me). I was just surprised on how much camber gain the Guldstrand + tall spindles provides. I thought it would be worth posting my findings. And from everything I have read, .7-1.0 degrees per inch seems like a good rule of thumb. But again, I don’t have enough real world experience to have a large opinion one way or another.



And yes, I have been running the ridetech tall spindles with the Guldstrand mod. The car did push on corner entry, but that could be any number of things. Overall though, the car did really well. Plus, that is my baseline setup, so I don't have a lot of comparison.
So I will try moving back to the stock mounting points and see what happens. I will make sure to post my findings.