Ridetech Tru Turn Upgrade Package

[Rod]

the problem with adapting a rack to an early frame is in the packaging......if you look at a corvette chassis c4-c5-c6-whatever the rack sits as high as the middle of the front dampener pulley..... because that was the area needed to match the control arms pivot points, so on a camaro (rear steer 67-69) the rack would have to be so high, you would have to notch the pan all the way to the crank, to get the pivots points lined up....so they mount it low and some give you steering arms that almost make up for the arm inclinations, but now the racks arms are at such a weird angle they have to limit steering movement as not to bind the ball joints,..... so the cars still have noticeable bump steer, and less steering radius, I have seen some claim they don't limit steering or don't have bumpsteer....I call BS on that....but they can send me a rack if they like and we will put it on a stock chassis and see what it does