RICK' S tanks question

[paulk68]

How do you know if a tank is a vaporworks tank or just an EFI tank?
Thanks
Paul

[jethrow6978]

http://www.mattsclassicbowties.com/c...-us/d2608.html

here is a link and a video of my tank that i picked up for my 69 firebird- lq4/t56 swap. and a basic efi tank only has one pick up.

http://www.youtube.com/watch?v=_avyExr8gqg

[CarlC]

All vaporworx equipped tanks will have a GM fuel module and will look something like this in the module mounting area.

[dcdman67]

Does anyone have a diagram for installation of the Ricks vaporworks tank? I have the tank pictured above and am starting my install. My main question is where does the return line fit in? My pump has a single outlet and the vapor line should be used for the evap canister.

Any help is appreciated. See this post for more details:

https://www.pro-touring.com/threads/...as-Tanks/page3

Thanks!
Dan

[68lovebuzz]

The vaporworx tank is a single feed setup. No return line needed. That's one of the many advantages.

[dcdman67]

Thanks Brian! Just finishing up the fuel line to the tank then starting on the evap canister. Should be done by the end of the day.

[CarlC]

Brian is correct. Single line to the fuel rail only.

As delivered tanks from Rick's that have the LS3 fuel module should already be set up for 58 psi output unless otherwise specified.

[Mkelcy]

Brian is correct. Single line to the fuel rail only.

As delivered tanks from Rick's that have the LS3 fuel module should already be set up for 5 psi output unless otherwise specified.

5 psi?

[CarlC]

58

That's what getting old eyes and using a tiny screen will do.