Results 1 to 20 of 44
Thread: First Build: '71 Nova
Hybrid View
-
10-12-2013 #1
Registered User
- Join Date
- Jul 2013
- Posts
- 23
Update: Pulled the fuel lines and tailpipes/hangers out, then had to go run an emergency errand. Sandpaper has started to arrive and I ordered a set of Motegi MR120 wheels 18x9.5 in black(24lbs, not too shabby), plus a cheap set of sumitomo tires to reestablish the car as a roller (the car came with the 5 factory 14" steels/bias ply and was rolling on AR outlaw/bfgTA that, luckily, decided to blow out AFTER they were piled neatly in the garage). Subframe connectors and body mounts from DSE are sitting on the couch, and the search for a roll cage begins after these messages.
-
01-12-2014 #2
Registered User
- Join Date
- Jul 2013
- Posts
- 23
Mini tubs and quadra-link have been added to the list. Now that I finished up my floor pan, I gotta cut it all up again, but I can admire it for a while as I replenish my FUNds.
Tail Panel, Trunk Floor, Rear Windshield to Deck Lid Panel and Radiator Support have been ordered.
So this is what I did tonight after the third quarter of the Denver/SD game. Plug welds plus some stitch welds for good measure. (also filled in the holes from the clecos(HA-COUGHsheetmetalscrews)
Goodnight everybody. Thanks for the support!
Reply With Quote
