building an EFI system with LS electronics ?

[80proZ]

As the title states. My plan is to build a 383 to replace my worn engine. I would like to FI it, but build my own system. I have the tools and skills to fab up my own intake using a factory style throttle body and factory style injectors. I would prefer not to use a mega squirt ECM. Can LS electronics be adapted to use like this?

[JD'sTT55]

Getting the correct 1x cam and 24x or 58x ( depending on computer year) crank signal for the computer to work correctly may be a challenge.

[parsonsj]

These guys specialize in exactly that:



http://www.eficonnection.com/eficonnection/default.aspx

[woody80z28]

You can do OBD1 GM pretty easily rather than OBD2 LS stuff. No crank trigger, etc needed. That's the route I'm going since my other two are already OBD1.

[JD'sTT55]

These guys specialize in exactly that:

http://www.eficonnection.com/eficonnection/default.aspx

Awesome info thanks for the link.

[80proZ]

Thanks guys. John, that's what I'm looking for thanks. I had actually check out their stuff before.