Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Results 1 to 9 of 9
    1. #1
      Join Date
      Mar 2008
      Location
      austria, where the kangaroos go skiing
      Posts
      190
      Country Flag: Austria

      bbc clutch on ls2

      so it seems like iīm swapping my 540 to an ls2 engine and now the first questions are coming up. i have a keisler tko600 behind the bbc with a brand new mcleod rst dual clutch. is there a possibility that the bellhousing and the clutch are gonna fit on the new engine and itīs flywheel or do i have to swap out all the parts?

      thanks,
      pat
      69 camaro, 418cui p1sc1, ridetech,forgeline, and some more money wasted

    2. #2
      Join Date
      Dec 2010
      Location
      St Louis
      Posts
      453
      Country Flag: United States
      If it's a 621 bell, it will bolt up to the LS, minus 1 bolt hole.
      If the clutch is drilled for a standard 11" big block flywheel pattern, therres a good chance bolt up to a sachs 1050 flywheel.
      You'll also need an LS7 pilot bearing.
      Info with part numbers.
      http://ls1tech.com/forums/conversion...-ls-motor.html
      And if you want to save a few lbs, an aluminum flywheel. Not sure what it's drilled for though. BTW the $200 price is marked down from Mcleods $800 list.
      http://www.racingjunk.com/Clutches/1...el-Chevy-.html

    3. #3
      Join Date
      Mar 2008
      Location
      austria, where the kangaroos go skiing
      Posts
      190
      Country Flag: Austria
      yep thatīs what i have read in several forum posts but just wanted to make sure. i have the 621 bellhousing so that should work out. the mcleod clutch is this one http://www.summitracing.com/parts/MCL-6911-07 i mean i can buy a ls clutch but if theres a slight chance that this clutch will fit i would be more than happy to get a flywheel to make up the difference. but thatīs a really good writeup on ls1tech, thanks gary
      69 camaro, 418cui p1sc1, ridetech,forgeline, and some more money wasted

    4. #4
      Join Date
      Dec 2010
      Location
      St Louis
      Posts
      453
      Country Flag: United States
      Just an FYI with the sachs flywheel. It has a larger center cutout leaving the inside 3/4" of the disk of the 11" BBC clutch disk not contacting anything. No one has had an issue that I've seen. But with a smaller clutch, you may have problems.

    5. #5
      Join Date
      Mar 2008
      Location
      austria, where the kangaroos go skiing
      Posts
      190
      Country Flag: Austria
      ok.....thanks
      69 camaro, 418cui p1sc1, ridetech,forgeline, and some more money wasted

    6. #6
      Join Date
      Mar 2008
      Location
      austria, where the kangaroos go skiing
      Posts
      190
      Country Flag: Austria
      just if anybody ever searches for info......i got this mcleod 560535 aluminum flywheel + .400 or the 460535 steel flywheel +.400 will fit the dual friction BBC clutch and mcleod recommends the standart chevrolet pilot bushing. badass deal with mcleod over racingjunk, paid 250$ shipped, summit wants 700$ for this flywheel. thanks again gary for all that info on ls1tech

      69 camaro, 418cui p1sc1, ridetech,forgeline, and some more money wasted


    7. #7
      Join Date
      Dec 2009
      Posts
      1,607
      Country Flag: United States
      Dayum Gary! I paid double for my Mcleod alum flywheel just a month ago...
      Ron in SoCal
      69 Camaro in progress
      http://www.lateral-g.net/forums/showthread.php4?t=31246

      Used to be known as flash911

    8. #8
      Join Date
      Dec 2010
      Location
      St Louis
      Posts
      453
      Country Flag: United States
      The pilot bearing has nothing to do with the flywheel, it's mounted in the crank. They might prefer a bushing over a bearing, bit I've never seen one for an LS crank. The standard f body seats in the deeper drilled out section of the crank, so a Muncie/TKO input shaft wont reach it. You will need the LS7 pilot bearing that seats in the larger, outer area.

      Quote Originally Posted by camaro427-69 View Post
      just if anybody ever searches for info......i got this mcleod 560535 aluminum flywheel + .400 or the 460535 steel flywheel +.400 will fit the dual friction BBC clutch and mcleod recommends the standart chevrolet pilot bushing. badass deal with mcleod over racingjunk, paid 250$ shipped, summit wants 700$ for this flywheel. thanks again gary for all that info on ls1tech

    9. #9
      Join Date
      Mar 2008
      Location
      austria, where the kangaroos go skiing
      Posts
      190
      Country Flag: Austria
      i placed the bearing already in my summit cart with the gm part nr. you have on ls1tech ;)
      69 camaro, 418cui p1sc1, ridetech,forgeline, and some more money wasted




    Advertise on Pro-Touring.com