Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Results 1 to 7 of 7
    1. #1
      Join Date
      Jan 2009
      Location
      Cannes, France
      Posts
      91

      Temperature goes up and down.

      My setup is a 350 smallblock, griffin big block alu radiator with an electric fan, CSR electric waterpump, 2 senders placed on each side of the thermostat housing in the intake manifold.
      The temperature goes up and down, it can change 30+ degrees and does it within 10-20 seconds.
      Both my gauges show the same, one is from Autometer and the other from Dakota.
      Changed my 180 degree thermostat to a brand new 195 today just to try something but still the same problem. The old thermostat was a different model than the new one, looks like one with a kind of bypass that I have seen photos of on this site.

      Will an electric pump turn the wrong way if connected wrong?

      How do I choose the right radiator cap? I have one from Be Cool and one from Griffin

      I have an overflow tank from BeCool but it doesnt seem to work that well or maybe it is too small 1 pint.

      Well thats all for now. Thx in advance.

    2. #2
      Join Date
      Jan 2009
      Location
      Cannes, France
      Posts
      91
      Nobody has any ideas?

    3. #3
      Join Date
      Sep 2004
      Location
      Central NJ
      Posts
      54
      Maybe air in the system. Did you burp it?

    4. #4
      Join Date
      Jun 2005
      Posts
      126
      Country Flag: United States
      Sounds like air in the system, possible a steam pocket is in the system which raises the temp quickly, then it comes back down. I had a similar problem once and cured it by drilling a 1/8 inch hole in the thermostat (hole goes up). Solved my issue.
      Anthony
      http://www.cardomain.com/ride/674663
      '71 Datsun 510, 2jz-gte (Supra TT) engine
      http://instagram.com/supra510


    5. #5
      Join Date
      Jan 2009
      Location
      Cannes, France
      Posts
      91
      Hi Guys



      Will look at the thermostat and see if there are any holes otherwise I will drill one.
      How does the "burping" work?

      Kenneth


    6. #6
      Join Date
      May 2005
      Location
      Fontana, CA
      Posts
      4,960
      Country Flag: United States
      Can be best accomplished through Block filling. When the T-stat housing is off, fill the block completely through the t stat opening. The problem usually comes with air trapped under the tstat when filling via the radiator. Also, filling while warmed up and fluid is cycling will help.
      Nick R.
      69 Camaro - 383, 700R4, 12 bolt 3.55, Hotchkis, Bilstein, Global West, Morris Classic
      08 HHR SS - Still Stock for now
      Do you still believe in all the things that you stood by before? Are you out there on the front lines, or at home keeping score?
      Do you care to be the layer of the bricks that seal your fate? Would you rather be the architect of what we might create?

    7. #7
      Join Date
      Sep 2004
      Location
      Central NJ
      Posts
      54
      Quote Originally Posted by kenhaw View Post
      Hi Guys

      Will look at the thermostat and see if there are any holes otherwise I will drill one.
      How does the "burping" work?

      Kenneth

      You can buy pre-drilled thermos but they are kind of uncommon to purchase. I run a drilled one in my daily and a flow restrictor in my Nova.




    Advertise on Pro-Touring.com