Results 1 to 20 of 49
Thread: Need Some Front End Help
Hybrid View
-
05-10-2010 #1
Registered User
- Join Date
- Jul 2009
- Location
- New Jersey
- Posts
- 536
I will go get her and bust out the measuring tape. I will post all measurements. That 87 7/8ths one should do it.
RJ Cilurso
67 Camaro with a few things bolted to it
12 Camaro with a few things bolted to it
50 Chevy 5 window p/u with a few things unbolted
USAF
-
05-10-2010 #2
Registered User
- Join Date
- Dec 2009
- Posts
- 1,607
At least you'll know if the sub is too far back (or not)...
Originally Posted by AintQik
Ron in SoCal
69 Camaro in progress
http://www.lateral-g.net/forums/showthread.php4?t=31246
Used to be known as flash911
05-12-2010 #3
Registered User
- Join Date
- Oct 2009
- Location
- New Derry, PA
- Posts
- 1,265
Another helpful measurement would be dimension "F". If it's correct, you've got a caster problem not a subframe fitment problem. Originally Posted by AintQik
(Now that I look again, "E" will also tell you if the lower A arms have the correct wheelbase geometry...)
Ray Kaufman - Wyotech Chassis Fab and High Performance Instructor. Words of Wisdom from an old master... at Asylum Custom Interiors website
05-12-2010 #4
Registered User
- Join Date
- Jul 2009
- Location
- New Jersey
- Posts
- 536
"E" or "F" might be tricky because the after market arms will probably move the ball joint, even "right" ones. I would suspect on any aftermarket arm car those measurements will be shorter than factory. However, now that you mention it, I could call Global and ask them how far the ball joint is supposed to be moved back and compare to what I have.
RJ Cilurso
67 Camaro with a few things bolted to it
12 Camaro with a few things bolted to it
50 Chevy 5 window p/u with a few things unbolted
USAF
Reply With Quote
